UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor xxu10
Visitor
304 Views
Registered: ‎12-24-2018

SDx Cannot find the top function in the design

Hi,

I am new to the SDSoC so I started from the reVISION stacks. In the example project 'filter2D', I just replaced the function xf::filter2D with xf::Sobel or xf::GaussianBlur and I didn't change anything else. Then it gives me [SYNCHK 200-79] Cannot find the top function error. So can I replace the original algorithm in the example project 'filter2D' ? If I can, what else should I do?

Thanks.

 

0 Kudos
1 Reply
Highlighted
Teacher xilinxacct
Teacher
296 Views
Registered: ‎10-23-2018

Re: SDx Cannot find the top function in the design

@xxu10

If I understand your question... it sounds like you 'essentially' changed the name of the top level module in your project. In the settings you have to change the name of the top level to match.

Hope that helps

If so, please mark as solution accepted. Kudos also welcomed. :-)

0 Kudos