sdsoc with petalinux

[1ymw1]

Hi,

I am new to SD_SOC but I have some experience with petalinux. I need to know whether it is possible to use image.ub and *.elf files that generate from sdsoc, with petalinux. Because I need to use USB camera and X11 forwarding through ethernet. I am using zedboard.

Thanks

[nutang]

Hi @1ymw1

You need to create a new platform

https://www.xilinx.com/html_docs/xilinx2018_2/sdsoc_doc/lpj1534452982777.html

Please refer below link for preparing the Image for the SDSoC Platform Utility

https://www.xilinx.com/html_docs/xilinx2018_2/sdsoc_doc/linux-boot-files-bks1504034371884.html?hl=petalinux

[1ymw1]

hey @nutang

Thanks, I will get back to you if I find any difficulty.

[nutang]

Hi @1ymw1

Any Update?

[1ymw1]

hi @nutang

I have a problem with software platform creation (https://www.xilinx.com/html_docs/xilinx2018_2/sdsoc_doc/linux-boot-files-bks1504034371884.html?hl=petalinux). If I want to create software platform using petalinux can I use the bsp file for that board or do I have to implement the hardware platform?

[nutang]

Hi @1ymw1

Are you using custom board or xilinx evaluation board?

[1ymw1]

hi @nutang

I am using ZED board and ultra96 board from avnet.

[nutang · Accepted solution]

Hi @1ymw1

Okay. You can use the board bsp