UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
940 Views
Registered: ‎09-23-2011

GTP Manual Phase alignment

Hi, In ARTIX7 GTP the TX FSM under init module is stuck inactive. PHALIGNMENT_DONE is not asserted and the TxFSMrESETdone is stuck at low. I introducded this issue when I tried to bypass TXBUFFER and RXBUFFER . Also I tried to Modify the constants/ counter value in the tx_Startup_fsm according to the stable clock period and still no luck.

 

 

 

 

 

0 Kudos
2 Replies
Xilinx Employee
Xilinx Employee
898 Views
Registered: ‎08-07-2007

Re: GTP Manual Phase alignment

hi

 

does TXRESETDONE or RXRESETDONE go high?

did you try example design?

 

Boris

------------------------------------------------------------------------------
Don't forget to reply, give kudo and accept as solution
------------------------------------------------------------------------------
0 Kudos
Explorer
Explorer
888 Views
Registered: ‎09-23-2011

Re: GTP Manual Phase alignment

TXresetdone and RXresetdone are fine in hardware and I haven't done the simulation yet will try that.
0 Kudos