cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
kensamuelson
Visitor
Visitor
6,841 Views
Registered: ‎08-31-2016

GTP wizard example with serial I/O links or scans

Jump to solution

I have created a transceiver wizard and example program.  What I want to do is to see the Eye diagram using the Serial I/O.  

 

My question is are there instructions or is it easy to Add a eye diagram to the existing Wizard example program?

 

I thought it could be done but i don't see any way to do it or I'm just missing it.  i thought that I would add in IBERT to my existing program but IBERT uses it's own transmit and receive and that would interfere with the Frame_Gen and Frame_Check.  Incidentally I'm using a AC701 board and Vivado 2016.2

 

Any help or insight would  be appreciated.   

Tags (1)
1 Solution

Accepted Solutions
kensamuelson
Visitor
Visitor
11,453 Views
Registered: ‎08-31-2016

Austin and Venkata,

 

Thank you. I wasn't aware of the eyescan information but I have now and have read thought it.


View solution in original post

0 Kudos
3 Replies
austin
Scholar
Scholar
6,833 Views
Registered: ‎02-27-2008

k,

 

Have you read:

 

xapp1198-eye-scan.pdf

Austin Lesea
Principal Engineer
Xilinx San Jose
Tags (1)
venkata
Moderator
Moderator
6,793 Views
Registered: ‎02-16-2010
AR#60024 discusses how to expand XAPP1198, In-System Eye Scan of a PCI Express Link with Vivado IP Integrator and AXI4, to systems other than PCI express.
http://www.xilinx.com/support/answers/60024.html
------------------------------------------------------------------------------
Don't forget to reply, give kudo and accept as solution
------------------------------------------------------------------------------
Tags (1)
kensamuelson
Visitor
Visitor
11,454 Views
Registered: ‎08-31-2016

Austin and Venkata,

 

Thank you. I wasn't aware of the eyescan information but I have now and have read thought it.


View solution in original post

0 Kudos