UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer sundarbas
Observer
367 Views
Registered: ‎12-20-2018

GTX transceiver in Kintex Ultrascale

Jump to solution

Hi,

I have some legacy IP from our V6 series that I want to use it directly in Kintex Ultrascale FPGA. 

When I use synplify_premier for synthesis of those modules, it says that GTX is not supported by the version of FPGA I have.

Does Xilinx support use of GTX transceiver in an Ultrascale FPGA?

Is there any easy way to convert existing GTX into GTH if so ?

 

Regards,
Sundar

0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
364 Views
Registered: ‎07-30-2007

Re: GTX transceiver in Kintex Ultrascale

Jump to solution

There is no direct translation between the GT's.  It shouldn't be hard to make a new block similar to the old one but I'm afraid it isn't automatic.  You must compare GT wizard settings and make them as close as you can.  If there is any setting you're not sure of in the conversion you can ask about it here.




----------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution
----------------------------------------------------------------------------


View solution in original post

1 Reply
Moderator
Moderator
365 Views
Registered: ‎07-30-2007

Re: GTX transceiver in Kintex Ultrascale

Jump to solution

There is no direct translation between the GT's.  It shouldn't be hard to make a new block similar to the old one but I'm afraid it isn't automatic.  You must compare GT wizard settings and make them as close as you can.  If there is any setting you're not sure of in the conversion you can ask about it here.




----------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution
----------------------------------------------------------------------------


View solution in original post