cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
438 Views
Registered: ‎11-23-2018

Implementation of USB PHY layer on GTH transceiver

Jump to solution

Greetings,

Hi, I am a new bee at Xilinx. I want to use Ultrascale GTH transceiver for my USB 3.1 gen1 gen2 IP. is it possible to implement USB PHY on a transceiver? And does Xilinx support its configuration preset like I have seen in GTH wizard for 1g_10_25g_switchable.

Is there any reference design available for USB PHY on GTH transceiver? please guide us.   

0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
414 Views
Registered: ‎05-02-2017

 

hi @verilog_bee ,

 

unfortunately, xilinx offically do not support the USB  , hence there is no USB IP from xilinx .

 

 

 

 

Regards
Chandra sekhar
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if solution provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------

View solution in original post

1 Reply
Moderator
Moderator
415 Views
Registered: ‎05-02-2017

 

hi @verilog_bee ,

 

unfortunately, xilinx offically do not support the USB  , hence there is no USB IP from xilinx .

 

 

 

 

Regards
Chandra sekhar
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if solution provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------

View solution in original post