UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Contributor
Contributor
252 Views
Registered: ‎05-14-2018

Is there a way to view the clock path in the transceiver?

Hi:

I try to find clock route like following picture:

擷取.PNG

Is there a document or tool to view the CLK path as shown above?

0 Kudos
2 Replies
Highlighted
Observer yuko.2828
Observer
209 Views
Registered: ‎12-27-2018

Re: Is there a way to view the clock path in the transceiver?

hi

Are you sure you postonh question to the correct site?

It seems like Intel document you share below.

0 Kudos
Moderator
Moderator
198 Views
Registered: ‎07-30-2007

Re: Is there a way to view the clock path in the transceiver?

No, I'm afraif that is not provided.  You would have to go to the clocking pages of the user guide, pages 157 and 217 for UG578 and then open an implemented design and check the settings for muxes in question.  You should have a good sense of what the muxes are set to for your design.  If you chose QPLL1 in the wizard that will mean T/RXPLLCKSEL will be 10 for instance. 




----------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution
----------------------------------------------------------------------------