cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
shareef@phoelex.com
Adventurer
Adventurer
554 Views
Registered: ‎04-30-2019

Issues running the IOModule examples

Jump to solution

Hi,

I'm trying to bring up a GTY transceiver using the IOModule.  I've built a BSP and thought I'd first try to run the examples that come with the IOModule.  These are in the directory Xilinx/SDK/2018.3/data/embeddedsw/XilinxProcessorIPLib/drivers/iomodule_v2_6/examples/ in my installation.

Of the two I've tried, one hangs and one fails to compile.

xiomodule_intr_example.c: this hangs somewhere during IOModuleDisableIntr().

xiomodule_low_level_example.c: this has a bunch of defines that don't exist and uses uint types that aren't recognised by the toolchain.

Should these examples be useable?  What should I be using to bring up the IOModule?

Thanks.

0 Kudos
1 Solution

Accepted Solutions
shareef@phoelex.com
Adventurer
Adventurer
454 Views
Registered: ‎04-30-2019
0 Kudos
1 Reply
shareef@phoelex.com
Adventurer
Adventurer
455 Views
Registered: ‎04-30-2019
0 Kudos