UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
307 Views
Registered: ‎07-10-2013

Kintex US/US+ GTY RX Trxelecidle & Rxoobvdpp Specifications

DS892 (v1.15) for Kintex UltraScale devices indicates in Table 74 on p.65 that the GTY Transceiver Receiver value for Trxelecidle, Time for RXELECIDLE to respond to loss or restoration of data, is typically 10ns, while the value for Rxoobvdpp, OOB threshold detect peak-to-peak, is in the range of 60mV to 150mV.

 

DS922 (v1.13) for Kintex UltraScale+ devices in Table 71 on p.58 makes no mention of Trxelecidle and Rxoobvdpp.

 

For Kintex UltraScale+ devices, what are the specification values for Trxelecidle and Rxoobvdpp, and why were such values omitted from the product datasheet, which has been in existence now for almost three years?

 

0 Kudos
2 Replies
Moderator
Moderator
261 Views
Registered: ‎05-02-2017

Re: Kintex US/US+ GTY RX Trxelecidle & Rxoobvdpp Specifications

Hi All ,

 

SR is created 10450960 for this thread. I am working on this 

 

 

Chandra 

Regards
Chandra sekhar
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if solution provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
Explorer
Explorer
70 Views
Registered: ‎07-10-2013

Re: Kintex US/US+ GTY RX Trxelecidle & Rxoobvdpp Specifications

Chandra et al,

Please provide an update on the current status of this; thanks.

0 Kudos