UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor jamesb.gahan
Visitor
4,682 Views
Registered: ‎02-23-2010

XCF04S JTAG Instruction Description

Hi,

 

Is there any documentation that will describe the function of all the XCFxxS boundary scan instruction op-codes.

The Platform Flash In-System Programmable Configuration PROMs DS123 (v2.18) May 19, 2010 Product Specification does not mention nor describe any of the JTAG instructions that need to be used to program the PROM such as the 'faddr', 'fpgm', and 'fdata0' instructions. Is there any other documents that I could be pointed to?

 

Thanks,

James

0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
4,680 Views
Registered: ‎08-28-2007

Re: XCF04S JTAG Instruction Description

The JTAG algorithm is not published. You can use an SVF file generated from iMPACT for JTAG programming, this will contain commands and data needed to program. Also you may reference the BSDL file in your install for OPCODEs.

 

 

0 Kudos