cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor
Visitor
4,690 Views
Registered: ‎02-23-2010

XCF04S JTAG Instruction Description

Hi,

 

Is there any documentation that will describe the function of all the XCFxxS boundary scan instruction op-codes.

The Platform Flash In-System Programmable Configuration PROMs DS123 (v2.18) May 19, 2010 Product Specification does not mention nor describe any of the JTAG instructions that need to be used to program the PROM such as the 'faddr', 'fpgm', and 'fdata0' instructions. Is there any other documents that I could be pointed to?

 

Thanks,

James

0 Kudos
1 Reply
Highlighted
Xilinx Employee
Xilinx Employee
4,688 Views
Registered: ‎08-28-2007

Re: XCF04S JTAG Instruction Description

The JTAG algorithm is not published. You can use an SVF file generated from iMPACT for JTAG programming, this will contain commands and data needed to program. Also you may reference the BSDL file in your install for OPCODEs.

 

 

0 Kudos