UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer jeremyward
Observer
3,734 Views
Registered: ‎07-17-2012

Automated simulation library compilation for ModelSim SE 6.3f

Jump to solution

What version of ISE supports automated simulation library compilation (wizard or command line or anything) for ModelSim SE 6.3f?  ISE 14.1 only supports ModelSim 6.6d or later. Compiling manually is a total pain.

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
4,461 Views
Registered: ‎07-16-2008

Re: Automated simulation library compilation for ModelSim SE 6.3f

Jump to solution

ISE 10.1 does. See Table 6-3 in the Simulation guide.

http://www.xilinx.com/itp/xilinx10/books/docs/sim/sim.pdf

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

2 Replies
Xilinx Employee
Xilinx Employee
4,462 Views
Registered: ‎07-16-2008

Re: Automated simulation library compilation for ModelSim SE 6.3f

Jump to solution

ISE 10.1 does. See Table 6-3 in the Simulation guide.

http://www.xilinx.com/itp/xilinx10/books/docs/sim/sim.pdf

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

Observer jeremyward
Observer
3,725 Views
Registered: ‎07-17-2012

Re: Automated simulation library compilation for ModelSim SE 6.3f

Jump to solution

Awesome.  Thanks so much!

0 Kudos