cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
636 Views
Registered: ‎11-23-2018

BRAM Output XXX value

Jump to solution

Unable get output value at BRAM single port ram v7.3

attached is a Simulation screenshot

BRAM initialised with .COE file

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Teacher
Teacher
561 Views
Registered: ‎07-09-2009

Re: BRAM Output XXX value

Jump to solution

reset_n is x,

 

<== If this was helpful, please feel free to give Kudos, and close if it answers your question ==>

View solution in original post

0 Kudos
5 Replies
Highlighted
Moderator
Moderator
593 Views
Registered: ‎08-08-2017

Re: BRAM Output XXX value

Jump to solution

Hi @verilog_bee 

You forget to add the simulation snippet. Please share that.

Please share the .xci/.xco (IP configuration) file and .coe file and let us know which VIVADO/ISE version you are using.

-------------------------------------------------------------------------------------------------------------------------------
Reply if you have any queries, give kudos and accept as solution
-------------------------------------------------------------------------------------------------------------------------------
0 Kudos
Highlighted
Teacher
Teacher
587 Views
Registered: ‎07-09-2009

Re: BRAM Output XXX value

Jump to solution

educated guess,

 you have one or more of th econtrol inputs to the ram as 'x' ,

   you need to define all control inputs, else yo uwill get a X on the output.

 

<== If this was helpful, please feel free to give Kudos, and close if it answers your question ==>
0 Kudos
Highlighted
Adventurer
Adventurer
574 Views
Registered: ‎11-23-2018

Re: BRAM Output XXX value

Jump to solution

Using ISE 14.7 BRAM v7.3 

0 Kudos
Highlighted
Teacher
Teacher
562 Views
Registered: ‎07-09-2009

Re: BRAM Output XXX value

Jump to solution

WARNING: File "E:/designs/sls/xilinx/local_repo/project_directory/ISE_14_7/bram_interface_ise/bram_interface_top.v" Line 29. For instance DUT/bram_inst/, width 1 of formal port wea is not equal to width 2 of actual signal wea.

WARNING: File "E:/designs/sls/xilinx/local_repo/project_directory/ISE_14_7/bram_interface_ise/bram_interface_top.v" Line 31. For instance DUT/bram_inst/, width 8 of formal port dina is not equal to width 16 of actual signal dina.

WARNING: File "E:/designs/sls/xilinx/local_repo/project_directory/ISE_14_7/bram_interface_ise/bram_interface_top.v" Line 35. For instance DUT/bram_inst/, width 8 of formal port doutb is not equal to width 16 of actual signal doutb.

WARNING: File "E:/designs/sls/xilinx/local_repo/project_directory/ISE_14_7/bram_interface_ise/old_tb/bram_interface_tb.v" Line 27. For instance bram_interface_tb/DUT/, width 2 of formal port wea is not equal to width 1 of actual variable wea.

WARNING: File "E:/designs/sls/xilinx/local_repo/project_directory/ISE_14_7/bram_interface_ise/old_tb/bram_interface_tb.v" Line 30. For instance bram_interface_tb/DUT/, width 16 of formal port dina is not equal to width 8 of actual variable dina.

WARNING: File "E:/designs/sls/xilinx/local_repo/project_directory/ISE_14_7/bram_interface_ise/old_tb/bram_interface_tb.v" Line 35. For instance bram_interface_tb/DUT/, width 16 of formal port doutb is not equal to width 8 of actual variable doutb.

<== If this was helpful, please feel free to give Kudos, and close if it answers your question ==>
0 Kudos
Highlighted
Teacher
Teacher
562 Views
Registered: ‎07-09-2009

Re: BRAM Output XXX value

Jump to solution

reset_n is x,

 

<== If this was helpful, please feel free to give Kudos, and close if it answers your question ==>

View solution in original post

0 Kudos