UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Reply

How to simulate example design mentioned in PG195 with vivado2016.04 and modelsim10.5?

Accepted Solution Solved
Highlighted
Visitor
Posts: 12
Registered: ‎12-06-2017
Accepted Solution

How to simulate example design mentioned in PG195 with vivado2016.04 and modelsim10.5?

[ Edited ]

This time i used vivado2016.04 and modelsim 10.5 to simulate,

but there is still a error in modelsim window.

捕获.PNG

 

i don't understand why it happen.

i looked up ug973 and found that

捕获.PNG

捕获1.PNG

 

you can see they are compatible.

 

this is modelsim version i used.

捕获3.PNG

 

Do i have to use vivado2017.03 and modelsim 10.6b?

 

i have no resource to download modelsim10.6b,and i also can't get the license.

 

i have already compiled the libraries successful with no errors. 

what should i do ?


Accepted Solutions
Xilinx Employee
Posts: 1,170
Registered: ‎07-16-2008

Re: How to simulate example design mentioned in PG195 with vivado2016.04 and modelsim10.5?

Did you successfully compile the simulation libraries targeting this Modelsim?

You may refer to the following AR if you haven't done so.

https://www.xilinx.com/support/answers/64083.html

 

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post


All Replies
Xilinx Employee
Posts: 1,170
Registered: ‎07-16-2008

Re: How to simulate example design mentioned in PG195 with vivado2016.04 and modelsim10.5?

Did you successfully compile the simulation libraries targeting this Modelsim?

You may refer to the following AR if you haven't done so.

https://www.xilinx.com/support/answers/64083.html

 

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
Visitor
Posts: 12
Registered: ‎12-06-2017

Re: How to simulate example design mentioned in PG195 with vivado2016.04 and modelsim10.5?

yes, i have already complied the library successful with no errors.

Visitor
Posts: 12
Registered: ‎12-06-2017

Re: How to simulate example design mentioned in PG195 with vivado2016.04 and modelsim10.5?

yes, i have already complied the library successful with no errors.
Xilinx Employee
Posts: 1,170
Registered: ‎07-16-2008

Re: How to simulate example design mentioned in PG195 with vivado2016.04 and modelsim10.5?

If you have already compiled the libraries and still encounter error, ensure you have the modelsim.ini (generated by compile_simlib) in the current simulation directory.

You'll be able to see the library mappings in the modelsim.ini and hence the pre-compiled libraries in Modelsim's library window. In this case, it looks secureip library is not correctly referenced.

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------