UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Newbie spring19981
Newbie
343 Views
Registered: ‎08-24-2018

ISE 14.7 and Vivado: chipscope for functional simulation

I learned that ChipScope can also be used for functional simulation. Is there a tutorial or youtube demo that shows how to do this?

 

Thanks in advance!

0 Kudos
4 Replies
Highlighted
Xilinx Employee
Xilinx Employee
321 Views
Registered: ‎09-24-2017

Re: ISE 14.7 and Vivado: chipscope for functional simulation

Hi @spring19981,

This core doesn't support simulation until now.

You can refer to PG172, 'simulation' section.

 

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------

0 Kudos
Scholar drjohnsmith
Scholar
313 Views
Registered: ‎07-09-2009

Re: ISE 14.7 and Vivado: chipscope for functional simulation

what do you mean by functional simulation ?

 

chip scope is typically used on the real fpga, and allows one to capture data from inside the fpga, 

    not used in simulation , which is software.

 

0 Kudos
Moderator
Moderator
276 Views
Registered: ‎04-24-2013

Re: ISE 14.7 and Vivado: chipscope for functional simulation

Hi @spring19981,

 

I believe that User Guide 908, chapter 10 and 11 is what you are looking for.

https://www.xilinx.com/support/documentation/sw_manuals/xilinx2018_2/ug908-vivado-programming-debugging.pdf

It shows you how to mark signals for debugging and how to generate a waveform.

This isn't simulation but you get a similar output.

 

Best Regards
Aidan

 

------------------------------------------------------------------------------------------------------------------
Please mark the Answer as "Accept as solution" if this answered your question
Give Kudos to a post which you think is helpful and may help other users
------------------------------------------------------------------------------------------------------------------
0 Kudos
Moderator
Moderator
266 Views
Registered: ‎09-15-2016

Re: ISE 14.7 and Vivado: chipscope for functional simulation

Hi @spring19981,

Chipscope pro is used for logic debugging and validation of a design running in hardware.

For chipscope pro tutorial please refer the below user guides:

ISE : https://www.xilinx.com/support/documentation/sw_manuals/xilinx14_7/ug750.pdf

Vivado (Vivado hardware manager): 

https://www.xilinx.com/support/documentation/sw_manuals/xilinx2018_2/ug936-vivado-tutorial-programming-debugging.pdf

Thanks & Regards,
Sravanthi B
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
0 Kudos