cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer
Observer
5,361 Views
Registered: ‎06-07-2012

ISIM Lite stops simulation at 1,000 ns

Jump to solution

I'm trying out ISIM and have a very simple counter with a clock period of 40 ns.

 

I have a for loop in the testbench that should produce a simulation into the millisec range but no matter what I do, the simulation stops at 1,000 ns.

 

From what i've read, ISIM lite is not suppose to have that kind of limitation.

 

Can anyone suggest what I'm doing wrong or what I need to change within the environment to be able to simulate beyond the 1000 ns limit.

 

Thanks

 

1 Solution

Accepted Solutions
Highlighted
Explorer
Explorer
8,364 Views
Registered: ‎07-18-2011

Re: ISIM Lite stops simulation at 1,000 ns

Jump to solution

Hi @jhinkle,

 

You can change the simulation time in Simulation Settings. It's the top field in the Simulation tab of the Simulation Settings window.

 

Regards,

Dave

 

View solution in original post

3 Replies
Highlighted
Explorer
Explorer
8,365 Views
Registered: ‎07-18-2011

Re: ISIM Lite stops simulation at 1,000 ns

Jump to solution

Hi @jhinkle,

 

You can change the simulation time in Simulation Settings. It's the top field in the Simulation tab of the Simulation Settings window.

 

Regards,

Dave

 

View solution in original post

Highlighted
Observer
Observer
5,337 Views
Registered: ‎06-07-2012

Re: ISIM Lite stops simulation at 1,000 ns

Jump to solution

Dave:

 

Thanks for replying but I must be blind because I can't find what you are stating.

 

Is the "Simulation Setting Window" part of ISIM or ISE?

 

I can't see a Simulation tab in either program.

 

Please help this old squirrel find the nut.

 

Thanks.

 

Joe

0 Kudos
Highlighted
Observer
Observer
5,333 Views
Registered: ‎06-07-2012

Re: ISIM Lite stops simulation at 1,000 ns

Jump to solution

Finally found it!!!

 

Thanks 

0 Kudos