UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
89 Views
Registered: ‎10-18-2017

Parse wdb file with script

Jump to solution

Hello, I am struggling to find a resource that tells me how I can change wdb file into a format that a Python or Shell script could open and parse. Can I directly open this file with Python and make some sense of it? If it is easier to just poiint me to a resource where this is documented instead of an extended detailed answer, please point me to it.

Thanks.

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
59 Views
Registered: ‎07-16-2008

回复: Parse wdb file with script

Jump to solution

I'm afraid not. You can view the .wdb format with Tcl command. This is documented in UG900.

http://www.xilinx.com/support/documentation/sw_manuals/xilinx2018_3/ug900-vivado-logic-simulation.pdf

pg. 81 Opening a Previously Saved Simulation Run

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
60 Views
Registered: ‎07-16-2008

回复: Parse wdb file with script

Jump to solution

I'm afraid not. You can view the .wdb format with Tcl command. This is documented in UG900.

http://www.xilinx.com/support/documentation/sw_manuals/xilinx2018_3/ug900-vivado-logic-simulation.pdf

pg. 81 Opening a Previously Saved Simulation Run

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos