UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor mahesh619
Visitor
570 Views
Registered: ‎10-28-2016

Partial reconfiguration on Nexys Board(artix FPGA)

Hello everyone,
I am doing my project on partial reconfiguration using the Nexys board(altera XC7a100tcsg324-1 FPGA).
I don't know how to do partial reconfiguration.I saw the PR guide in which it is given that artrix 7 series supports PR. I have also seen some videos regarding PR using zynq board, but I am not clear about how far this will work out on Nexys board. I need some example implementations.
Please do guide me about PR on Nexys board(step by step).
0 Kudos
1 Reply
Scholar austin
Scholar
538 Views
Registered: ‎02-27-2008

Re: Partial reconfiguration on Nexys Board(artix FPGA)

That is a Xilinx Artix device number,

 

So I presume you mean a Xilinx device on your Nexsys 4 board?


If so, yes, all Xilinx devices support PR.  There are tutorials to learn how to use PR:

 

https://www.xilinx.com/support/documentation/sw_manuals/xilinx2017_4/ug947-vivado-partial-reconfiguration-tutorial.pdf

 

 

Austin Lesea
Principal Engineer
Xilinx San Jose
0 Kudos