UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Reply

Problem with Post Route Test bench

Visitor
Posts: 9
Registered: ‎06-21-2012

Problem with Post Route Test bench

Hi - I'm using the Xilinx ISIM(13.3) simulator and have a problem when trying to run a post route simulation.

The behavioral simulation runs fine, but when I go to run the post route simulation the design hierarchy does not instantiate a behavioral Ethernet mac model I have in my testbench (I just see that square with orange question marks).

When I try to either "Add file" or "add copy of the file" it says it already exists in the design hierarchy. I have tried running the simulation and it is not invoking the MAC model.

BTW  the design hierarchy does instantiate the post route netlist for my design okay - its just not picking up part of the testbench.

Any ideas what I am doing wrong ?

 

Thanks for your help

 

Vicki