cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
289 Views
Registered: ‎09-16-2019

Simulating Xilinx IP in VCS standalone

Hello, 

I would like to simulate a Xilinx IP module in VCS. Specifically, I want to simulate a FIFO module created by the FIFO Generator. The FIFO will be instantiated inside a module I am writing. I am running in a Linux environment. 

What is the procedure for doing this? I have already generated the IP output products.   

Thank you

0 Kudos
1 Reply
graces
Moderator
Moderator
201 Views
Registered: ‎07-16-2008

You may run the following Tcl command in Vivado to export the sim script for the IP.

export_ip_user_files -of_objects [get_ips <ip name>]

Go to the output directoy/sim_scripts/<ip name>/vcs, and inspect the simulation scripts.

-----------------------------------------------------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
If starting with Versal take a look at our Versal Design Process Hub and our Versal Blogs.
-----------------------------------------------------------------------------------------------------------------------
0 Kudos