UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
309 Views
Registered: ‎03-31-2016

VU440 MMCM simulation issue

Jump to solution

Hi 

 

I used MMCM IP to generator clock, if input clock disable a time the MMCM output clock will not generator, at this time the input clock enable the MMCM output clock can generator clock?

0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
265 Views
Registered: ‎04-24-2013

Re: VU440 MMCM simulation issue

Jump to solution

Hi @quincyq2003 ,

Have you applied a reset after the input clock has resumed, if not then it will not lock.

Capture.PNG

Best Regards
Aidan

 

------------------------------------------------------------------------------------------------------------------
Please mark the Answer as "Accept as solution" if this answered your question
Give Kudos to a post which you think is helpful and may help other users
------------------------------------------------------------------------------------------------------------------

View solution in original post

0 Kudos
2 Replies
Moderator
Moderator
266 Views
Registered: ‎04-24-2013

Re: VU440 MMCM simulation issue

Jump to solution

Hi @quincyq2003 ,

Have you applied a reset after the input clock has resumed, if not then it will not lock.

Capture.PNG

Best Regards
Aidan

 

------------------------------------------------------------------------------------------------------------------
Please mark the Answer as "Accept as solution" if this answered your question
Give Kudos to a post which you think is helpful and may help other users
------------------------------------------------------------------------------------------------------------------

View solution in original post

0 Kudos
Explorer
Explorer
209 Views
Registered: ‎03-31-2016

Re: VU440 MMCM simulation issue

Jump to solution

Hi @amaccre 

 

This issue is resolve.

 

Thanks for your help!!!

 

0 Kudos