UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer fvietmey
Observer
356 Views
Registered: ‎01-24-2015

Vivado Logic Simulation (Windows) - missing run.bat

Jump to solution

Hi,

 

I am looking to do VHDL/C++ co-simulation on a Windows machine. In appendix I of UG900 (v2018.2), a batch file named run.bat is referenced to compile the examples on Windows.

 

I can find the examples in the specified folder, but the run.bat is missing. Can someone please post what should be in that file?

 

Thanks!

 

Felix

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
297 Views
Registered: ‎07-16-2008

回复: Vivado Logic Simulation (Windows) - missing run.bat

Jump to solution

Hi Felix,

Attached is the run.bat and README for use in Windows. This is for Verilog counter example.

Change the install_root variable to pointed to the installed Vivado version.

A CR has been filed against documentation.

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

2 Replies
Xilinx Employee
Xilinx Employee
298 Views
Registered: ‎07-16-2008

回复: Vivado Logic Simulation (Windows) - missing run.bat

Jump to solution

Hi Felix,

Attached is the run.bat and README for use in Windows. This is for Verilog counter example.

Change the install_root variable to pointed to the installed Vivado version.

A CR has been filed against documentation.

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

Observer fvietmey
Observer
282 Views
Registered: ‎01-24-2015

回复: Vivado Logic Simulation (Windows) - missing run.bat

Jump to solution

That works, one thing to add is that one has to have the library folders in PATH when executing run_xsim.exe

 

Thanks for the help!

 

Felix

0 Kudos