cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
marrirohit
Observer
Observer
3,538 Views
Registered: ‎10-29-2012

axi_iic_v2_0_10 compilation issue

Hi ,

  I have generated axi iic from vivado tool , Version 2015.4 , im trying to instantiate the generated axi iic and run the simulation with irun tool by specifying file list. I'm receiving the error for line

 

LIBRARY axi_iic_v2_0_10

 

*E : Logical library name must be mapped to design library

 

I tried alot to know the library path to specify the path in my file list , But i didnot succeed in finding library path of axi_iic_V2_0_10

the only library path i have specified is

/ltools/xilinx/Vivado/Vivado/2015.2/data/verilog/src/unisims

/ltools/xilinx/Vivado/Vivado/2015.2/data/verilog/src/unimacros

 

What else should i specify inorder to compile, Please help

 

Thanks ,

Rohit Marri

0 Kudos
1 Reply
htsvn
Xilinx Employee
Xilinx Employee
3,441 Views
Registered: ‎08-02-2007

hi,

 

what simulator are you using? if you are using the third party compilers, refer to table 2-2 of this document for supported list.

https://www.xilinx.com/support/documentation/sw_manuals/xilinx2015_4/ug973-vivado-release-notes-install-license.pdf

 

if this is a supported simulator, attach your test case.

 

--hs

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
0 Kudos