UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Explorer
Explorer
11,039 Views
Registered: ‎03-25-2014

fail to generate vcs filelist following with script get_vcs_sim_files_RTL_proj.tcl

Jump to solution

Hi, 

 

I just followed the 

AR# 56490

to generate vcs file list, but met error during this procedure.

i saved the log file(error.log) and 

attatched it for your reference

 

BR

Xikun

 

Tags (1)
0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
15,869 Views
Registered: ‎04-17-2011

Re: fail to generate vcs filelist following with script get_vcs_sim_files_RTL_proj.tcl

Jump to solution
Yes, the tool version given in the Release Notes is the minimum version needed. The higher version of the tool should work. The minimum required version for 2013.2 is Synopsys VCS and VCS MX (G-2012.09) or higher.
Regards,
Debraj
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------

View solution in original post

0 Kudos
9 Replies
Xilinx Employee
Xilinx Employee
11,034 Views
Registered: ‎04-16-2012

Re: fail to generate vcs filelist following with script get_vcs_sim_files_RTL_proj.tcl

Jump to solution

Hi,

 

I hope this helps: http://www.xilinx.com/training/vivado/simulating-with-synopsys-vcs-in-vivado.htm

 

Thanks

--------------------------------------------------------------------------------------------
Have you tried typing your question in Google? If not you should before posting. Also, MARK this is as an answer in case it helped resolve your query/issue.Give kudos to the post that helped you to find the solution.
0 Kudos
Xilinx Employee
Xilinx Employee
11,026 Views
Registered: ‎07-16-2008

Re: fail to generate vcs filelist following with script get_vcs_sim_files_RTL_proj.tcl

Jump to solution

As stated in the AR notes, this script must use the Synthesis Design Check Point IP option during IP output product generation. It will read the DCPs generated from IP OOC synth run and write simulation netlist.

 

What version of Vivado are you using?

If you use 2013.3 and above, you can run export_simulation command to generate a standalone run file for VCS. For more information, please refer to UG900. Of course you need to use the compatible VCS version.

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Explorer
Explorer
11,023 Views
Registered: ‎03-25-2014

Re: fail to generate vcs filelist following with script get_vcs_sim_files_RTL_proj.tcl

Jump to solution

Hi, 

0 Kudos
Highlighted
Moderator
Moderator
10,976 Views
Registered: ‎04-17-2011

Re: fail to generate vcs filelist following with script get_vcs_sim_files_RTL_proj.tcl

Jump to solution
get_files -compile_order sources -used_in simulation \
-of_objects [get_files <IP name>.xci] command can be used in your Vivado project to get a list of files which would be used in simulation for the IP.xci. This can be modified to suit your purpose (if the only intent is to know what files are needed for simulation). Other alternative would be to run Vivado Simulator which generates a .prj file in sim_1 folder of your project. This is the complete fileset for simulation. Tweak it to use in VCS.

Refer Xilinx Docs for details on get_files.
Regards,
Debraj
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
0 Kudos
Explorer
Explorer
10,412 Views
Registered: ‎03-25-2014

Re: fail to generate vcs filelist following with script get_vcs_sim_files_RTL_proj.tcl

Jump to solution

hi, 

 

if we use vivado2013.2, what is the appropriate vcs version? vcs mx 2013.6

and ,how about vivado 2013.4?

 

BR

Xikun

 

0 Kudos
Explorer
Explorer
10,408 Views
Registered: ‎03-25-2014

Re: fail to generate vcs filelist following with script get_vcs_sim_files_RTL_proj.tcl

Jump to solution

hi, 

 

if you have the appropriate vcs version, can you capture a figure of executing the "vcs -id" on your linux console for us.

our IT is planning to purchase/install the VCS .


@xikun.dai wrote:

hi, 

 

if we use vivado2013.2, what is the appropriate vcs version? vcs mx 2013.6

and ,how about vivado 2013.4?

 

BR

Xikun

 


 

0 Kudos
Xilinx Employee
Xilinx Employee
10,391 Views
Registered: ‎04-16-2012

Re: fail to generate vcs filelist following with script get_vcs_sim_files_RTL_proj.tcl

Jump to solution

Hi,

 

The appropriate vcs version for Vivado 2013.4 is: vcs mx 2013.06

See the section "Compatible Third Party tools" in the following user guide: http://www.xilinx.com/support/documentation/sw_manuals/xilinx2013_4/ug973-vivado-release-notes-install-license.pdf

 

Thanks

--------------------------------------------------------------------------------------------
Have you tried typing your question in Google? If not you should before posting. Also, MARK this is as an answer in case it helped resolve your query/issue.Give kudos to the post that helped you to find the solution.
0 Kudos
Explorer
Explorer
10,376 Views
Registered: ‎03-25-2014

Re: fail to generate vcs filelist following with script get_vcs_sim_files_RTL_proj.tcl

Jump to solution

Hi,

 

thanks, 

currently, I know vcs mx 2013.6 is ok for vivado 2013.4.

so , can we use vcs mx 2013.6 for vivado 2013.2?

 

BR
Xikun

0 Kudos
Moderator
Moderator
15,870 Views
Registered: ‎04-17-2011

Re: fail to generate vcs filelist following with script get_vcs_sim_files_RTL_proj.tcl

Jump to solution
Yes, the tool version given in the Release Notes is the minimum version needed. The higher version of the tool should work. The minimum required version for 2013.2 is Synopsys VCS and VCS MX (G-2012.09) or higher.
Regards,
Debraj
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------

View solution in original post

0 Kudos