UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
1,524 Views
Registered: ‎06-09-2016

remove all force signal values in vivado simulator

Jump to solution

Hello in my siimulation I'm running tcl commands to force signals values in runtime for save time and efford during first steps of simulating a design but when I want to restart the simulation to change the signal behaviour the previous force signal values remains in simulation and this can cause problems in my new simulation.

 

The question is, how can I declare an tcl command for remove all force signal values in a simulation?.

 

I know is possible to do it with one signal but do it for every signal changed in a simulation could be a little bit tedious and generate some mistakes.

 

Thanks,

regards.

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
2,583 Views
Registered: ‎02-14-2014

Re: remove all force signal values in vivado simulator

Jump to solution

Hello @jmartinez,

 

You can use command below command -

 

remove_forces -all

Regards,
Ashish
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
0 Kudos
3 Replies
Xilinx Employee
Xilinx Employee
2,584 Views
Registered: ‎02-14-2014

Re: remove all force signal values in vivado simulator

Jump to solution

Hello @jmartinez,

 

You can use command below command -

 

remove_forces -all

Regards,
Ashish
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
0 Kudos
Xilinx Employee
Xilinx Employee
1,512 Views
Registered: ‎10-24-2013

Re: remove all force signal values in vivado simulator

Jump to solution

Hi @jmartinez

Additionally, -help will give you all details related to the usage of the command.

For example remove_forces -help

Thanks,Vijay
--------------------------------------------------------------------------------------------
Please mark the post as an answer "Accept as solution" in case it helped resolve your query.
Give kudos in case a post in case it guided to the solution.
0 Kudos
Adventurer
Adventurer
1,499 Views
Registered: ‎06-09-2016

Re: remove all force signal values in vivado simulator

Jump to solution

thanks @vijayak and @ashishd, is was exactly what I was looking for.

 

regards, julian.

0 Kudos