cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
mrunal9
Visitor
Visitor
4,603 Views
Registered: ‎03-11-2010

virtex II pro

What is the maximum frequency that can be applied to virtex II pro xc2vp70 (device 1704)? How to use the DCM for working at higher frequencies on the virtex II pro xc2vp70 (device 1704)?
Tags (3)
0 Kudos
Reply
3 Replies
htsvn
Xilinx Employee
Xilinx Employee
4,596 Views
Registered: ‎08-02-2007

Hi,

 

Check the DCM Switching Characteristics in the page 44 of V2P Datasheet.

 

http://www.xilinx.com/support/documentation/data_sheets/ds083.pdf

 

Do check the speedgrade to know the range of DCM.

 

Thnx

 

 

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
0 Kudos
Reply
mrunal9
Visitor
Visitor
4,576 Views
Registered: ‎03-11-2010

Hello, Thank you for your help. But it has not solved my problem. I wanted to know that what is the maximum frequency that can be practically applied to virtex II pro xc2vp70 (-71704 device).

0 Kudos
Reply
htsvn
Xilinx Employee
Xilinx Employee
4,567 Views
Registered: ‎08-02-2007

Hi,

 

Do you mean the max frequency at which the design runs?

 

If this is the case, then check the timing report to see it.

 

Thx

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
0 Kudos
Reply