cancel
Showing results for 
Search instead for 
Did you mean: 
Newbie
Newbie
838 Views
Registered: ‎05-16-2018

Need a CPLD programmer to create a firmware for stepper motor

Need a CPLD programmer to create a firmware for stepper motor
chip xilinx xc2c64a (driver and programmer I will provide).
need to start immediately.
Specify the approximate cost, Skype, CPLD experience.
Write to the mail yanbotalov (dog) gmail.com with a resume and portfolio on CPLD

0 Kudos
2 Replies
Highlighted
Teacher
Teacher
814 Views
Registered: ‎07-09-2009

Re: Need a FPGA programmer to create a firmware for stepper motor

The xc2c64a  is a CPLD,

 

you have posted this in the spartan forum,

 

 

I assume your basing it upon

 

https://eewiki.net/pages/viewpage.action?pageId=4096117

 

<== If this was helpful, please feel free to give Kudos, and close if it answers your question ==>
0 Kudos
Highlighted
Moderator
Moderator
777 Views
Registered: ‎01-15-2008

Re: Need a CPLD programmer to create a firmware for stepper motor

you may check the following link which might help

https://www.xilinx.com/alliance/member-design-services.html

0 Kudos