We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Showing results for 
Search instead for 
Did you mean: 
Registered: ‎11-16-2011

Reconstruct the image



I am using spartan-3AN to receive data from IR camera. Then data is sent to a client application in the computer via TCP/IP offload engine. The FPGA is used to provide interface between the TCP/IP offload engine and the camera electronics. The problem is that although the image is acquired from the camera but it keeps continuously moving. The FPGA Block RAM is used as FIFO buffer to temporarily store the data and then data is trnaferred to TCP/IP offload engine via 64 KB SDRAM. I need help on how to stabilize the image which is recontructed in the computer.

Tags (1)
0 Kudos
2 Replies
Teacher eteam00
Registered: ‎07-21-2009

Re: Reconstruct the image

Please define 'stabilise' a bit more precidely.  Without reading your thoughts (it's easier to read your posts), I have no idea what you have in mind.


-- Bob Elkind

README for newbies is here: http://forums.xilinx.com/t5/New-Users-Forum/README-first-Help-for-new-users/td-p/219369

1. Read the manual or user guide. Have you read the manual? Can you find the manual?
2. Search the forums (and search the web) for similar topics.
3. Do not post the same question on multiple forums.
4. Do not post a new topic or question on someone else's thread, start a new thread!
5. Students: Copying code is not the same as learning to design.
6 "It does not work" is not a question which can be answered. Provide useful details (with webpage, datasheet links, please).
7. You are not charged extra fees for comments in your code.
8. I am not paid for forum posts. If I write a good post, then I have been good for nothing.
0 Kudos
Teacher rcingham
Registered: ‎09-09-2010

Re: Reconstruct the image


And as you want to run them on the PC, this thread is off-topic.

"If it don't work in simulation, it won't work on the board."
0 Kudos