06-04-2014 08:23 PM
I have done vhdl code for color changing on monitor through vga port of spartan3E and it works successfully but i am not able to display image on monitor. As we have 5 out pins to vga i.e hsync,vsync,red,green and blue ,i am not understanding how to assign bits of pixel to red, grren and blue out of vga. which image format is compatible with vga. If we have 8 bits per pixel then how to assign this to out pins?
06-04-2014 11:10 PM
06-04-2014 11:25 PM
Please refer the attached document. can you please send me your board ucf and datasheet .
06-05-2014 01:09 AM
06-05-2014 01:27 AM
RGB3=uint8(IMG > 128);
is it correct way to convert 24 bit color image into 3 bit color in matlab.
or suggest me some links regarding that
06-05-2014 01:44 AM
06-11-2014 07:26 PM
i have a question to ask you , can sparton 3E run some iamge processing program,such as edge detect, dialaton,and so on.
06-11-2014 09:56 PM
You can try implementing for smaller sizes but as these devices doesn't have DSP blocks and low density devices these are not suitable for larger video sizes or video applications.
The Xilinx Video IP's are not supported for these devieces.