UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Explorer
Explorer
630 Views
Registered: ‎03-08-2018

How do I make mcs file with spartan6lx16-2FTG256C

Jump to solution

Dear All,

I've got a simple board of  XC6SLX16-2FTG256C and there is no additional PROM.

I can success to make bit file and tested with it. 

 

But as you already know that If I turn-off the power after turn-on, then FPGA is reset.

So If I can do make MCS file, I want to use this board.

But I don't know what exactly should I have to do to make MCS file

 

Would you please let me know what am I supposed to do ?

Please step by step let me know.

 

q100.JPG

 

 

 

q99.JPG

0 Kudos
1 Solution

Accepted Solutions
828 Views
Registered: ‎06-21-2017

Re: How do I make mcs file with spartan6lx16-2FTG256C

Jump to solution

Section 2.2.2 of the manual describes the Micron SPI Flash memory. 

3 Replies
628 Views
Registered: ‎06-21-2017

Re: How do I make mcs file with spartan6lx16-2FTG256C

Jump to solution

Are you sure there is no PROM on the board?  Very few commercially available boards do not contain non-volatile storage for the FPGA program. 

0 Kudos
Explorer
Explorer
620 Views
Registered: ‎03-08-2018

Re: How do I make mcs file with spartan6lx16-2FTG256C

Jump to solution

@bruce_karaffa Thanks for reply,

 

Sorry, that was my typo. not PROM, I mean flash memory.

and I've attached document of fpga.

 

you can see, there is no any flash memory.

I'm not sure, but I can make a MCS file. but I don't know .

Would you please let me know?

 

 

0 Kudos
829 Views
Registered: ‎06-21-2017

Re: How do I make mcs file with spartan6lx16-2FTG256C

Jump to solution

Section 2.2.2 of the manual describes the Micron SPI Flash memory.