UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Reply

Need a CPLD programmer to create a firmware for stepper motor

Highlighted
Newbie
Posts: 2
Registered: ‎05-16-2018

Need a CPLD programmer to create a firmware for stepper motor

[ Edited ]

Need a CPLD programmer to create a firmware for stepper motor
chip xilinx xc2c64a (driver and programmer I will provide).
need to start immediately.
Specify the approximate cost, Skype, CPLD experience.
Write to the mail yanbotalov (dog) gmail.com with a resume and portfolio on CPLD

Scholar
Posts: 2,512
Registered: ‎07-09-2009

Re: Need a FPGA programmer to create a firmware for stepper motor

[ Edited ]

The xc2c64a  is a CPLD,

 

you have posted this in the spartan forum,

 

 

I assume your basing it upon

 

https://eewiki.net/pages/viewpage.action?pageId=4096117

 

Moderator
Moderator
Posts: 1,496
Registered: ‎01-15-2008

Re: Need a CPLD programmer to create a firmware for stepper motor

you may check the following link which might help

https://www.xilinx.com/alliance/member-design-services.html