UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Participant deritha-06
Participant
3,559 Views
Registered: ‎04-15-2010

question about spartan-3e

Jump to solution

Hi,

 

I'm a fresh user of spartan-3e. What I did step by step:

 

1. check out spartan3e

2. unzip s3esk_startup.zip and so on

3. connect the spartan-3e board

4. click the windows batch file, I could find the scrolling message on the board

 

What could I do if I want to change the output information on the board?

 

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Xilinx Employee
Xilinx Employee
4,605 Views
Registered: ‎01-03-2008

Re: question about spartan-3e

Jump to solution

> What could I do if I want to change the output information on the board?

 

You would have to become an FPGA designer and create a new design for the FPGA on the board.

 

Start with the User Guide for the board that you are using.

Message Edited by mcgett on 04-16-2010 09:06 AM
------Have you tried typing your question into Google? If not you should before posting.
Too many results? Try adding site:www.xilinx.com
2 Replies
Highlighted
Xilinx Employee
Xilinx Employee
4,606 Views
Registered: ‎01-03-2008

Re: question about spartan-3e

Jump to solution

> What could I do if I want to change the output information on the board?

 

You would have to become an FPGA designer and create a new design for the FPGA on the board.

 

Start with the User Guide for the board that you are using.

Message Edited by mcgett on 04-16-2010 09:06 AM
------Have you tried typing your question into Google? If not you should before posting.
Too many results? Try adding site:www.xilinx.com
Historian
Historian
3,520 Views
Registered: ‎02-25-2008

Re: question about spartan-3e

Jump to solution

mcgett wrote:

> What could I do if I want to change the output information on the board?

 

You would have to become an FPGA designer and create a new design for the FPGA on the board.


 
Brilliant!
----------------------------Yes, I do this for a living.
0 Kudos