UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor pseudonym
Visitor
632 Views
Registered: ‎11-12-2018

Vivado corrupted .v files after crash during synthesis

Vivado crashed during a synthesis and I had to restart my computer,
The two very important files were corrupted and now only contain bad characters.

  • [HDL 9-806] Syntax error near "non-printable character with the hex value '0x0'". 

Also, the old project wouldn't open and I had to create a new project and add all the old source files.
Any Ideas on how to fix?

I would add the files but the forums are giving me "The attachment's datapath.v content type (application/octet-stream) does not match its file extension and has been removed."

0 Kudos
9 Replies
Moderator
Moderator
608 Views
Registered: ‎03-16-2017

Re: Vivado corrupted .v files after crash during synthesis

Hi @pseudonym,

I have sent you ezmove ftp test package, through which you can provide your files to regenerate this issue at my end. 

 

Regards,

hemangd

Regards,
hemangd

Don't forget to give kudos and mark it as accepted solution if your issue gets resolved.
0 Kudos
Visitor pseudonym
Visitor
593 Views
Registered: ‎11-12-2018

Re: Vivado corrupted .v files after crash during synthesis

Unfortunately, it appears that ezmove does not like my university's internet as my session expires immediately and after I navigate to a new page it asks me to login. Thus I cannot upload anything to ezmove. Furthermore, the VPN I have does allow me to navigate on ezmove but I does not let me upload files.

Also, do you only want the affected files or the whole project?

0 Kudos
Moderator
Moderator
589 Views
Registered: ‎03-16-2017

Re: Vivado corrupted .v files after crash during synthesis

Hi @pseudonym,

Clear your browser cache and then try to upload. 

And provide upto date archived project to regenerate the issue. 

 

Regards,

hemangd

Regards,
hemangd

Don't forget to give kudos and mark it as accepted solution if your issue gets resolved.
0 Kudos
Moderator
Moderator
560 Views
Registered: ‎03-16-2017

Re: Vivado corrupted .v files after crash during synthesis

Hi @pseudonym,

Can you provide the archived project to regenerate this issue at my end?

Regards,

hemangd

 

Regards,
hemangd

Don't forget to give kudos and mark it as accepted solution if your issue gets resolved.
0 Kudos
Visitor pseudonym
Visitor
544 Views
Registered: ‎11-12-2018

Re: Vivado corrupted .v files after crash during synthesis

No, I cant, I dont have an archive,

0 Kudos
Moderator
Moderator
539 Views
Registered: ‎03-16-2017

Re: Vivado corrupted .v files after crash during synthesis

Hi @pseudonym,

 

The zip file which you have provided through ezmove yesterday, by using that i cannot able to open the project from .xpr. 

To archive your project - In vivado GUI - go to files - Project - Archive. 

archivee.JPG

Regards,

hemangd

 

Regards,
hemangd

Don't forget to give kudos and mark it as accepted solution if your issue gets resolved.
0 Kudos
Visitor pseudonym
Visitor
532 Views
Registered: ‎11-12-2018

Re: Vivado corrupted .v files after crash during synthesis

I can't open the old project because several files got corrupted

I can't archive the old project because several files got corrupted

0 Kudos
Moderator
Moderator
530 Views
Registered: ‎03-16-2017

Re: Vivado corrupted .v files after crash during synthesis

Hi @pseudonym,

Than this is not a synthesis issue i guess as you mentioned in the first note  >>Vivado crashed during a synthesis and I had to restart my computer,

Try to create a new project from scratch in different project directory and check if it is getting corrupted or not. Also turn off the anti virus while working with Vivado. 

 

Regards,

hemangd

Regards,
hemangd

Don't forget to give kudos and mark it as accepted solution if your issue gets resolved.
0 Kudos
Highlighted
Moderator
Moderator
494 Views
Registered: ‎07-21-2014

Re: Vivado corrupted .v files after crash during synthesis

@pseudonym

I don't think Vivado will edit the RTL files by its own, are you using any additional scripts? Also, please share the OS details also here.

Thanks
Anusheel

0 Kudos