cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor
Visitor
1,116 Views
Registered: ‎03-27-2018

i want to synthesis a simple project, but failed

Jump to solution

start_gui
open_project C:/Users/lenovo/Desktop/vivado/project_1.xpr
open_project C:/Users/lenovo/Desktop/vivado/project_1.xpr
Scanning sources...
Finished scanning sources
INFO: [IP_Flow 19-234] Refreshing IP repositories
INFO: [IP_Flow 19-1704] No user IP repositories specified
INFO: [IP_Flow 19-2313] Loaded Vivado IP repository 'E:/vivado/Vivado/2017.4/data/ip'.
open_project: Time (s): cpu = 00:00:13 ; elapsed = 00:00:13 . Memory (MB): peak = 766.676 ; gain = 69.574
update_compile_order -fileset sources_1
reset_run synth_1
launch_runs synth_1 -jobs 2
[Fri Mar 30 10:48:41 2018] Launched synth_1...
Run output will be captured here: C:/Users/lenovo/Desktop/vivado/project_1.runs/synth_1/runme.log

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
1,454 Views
Registered: ‎03-16-2017

Re: make it out!! thank you soooo much!

Jump to solution

Hi @alstonl,

 

If your question is answered and/or your issue is solved, please mark a response that resolved your issue, as Accepted Solution (more info on this can be found here: https://forums.xilinx.com/t5/help/faqpage/faq-category-id/solutions#solutions). This way, the topic can be completed then. 

 

If this is not solved/answered, please reply in the thread.

 

Thanks in advance and have a great day.

Regards,
hemangd

Don't forget to give kudos and mark it as accepted solution if your issue gets resolved.

View solution in original post

0 Kudos
5 Replies
Highlighted
Moderator
Moderator
1,106 Views
Registered: ‎03-16-2017

Re: i want to synthesis a simple project, but failed

Jump to solution

Hi @alstonl,

 

Provide the synthesis runme.log which will be stored here C:/Users/lenovo/Desktop/vivado/project_1.runs/synth_1/runme.log

 

Which will show the specific error which you are facing in synthesis phase.

 

Regards,

hemangd

Regards,
hemangd

Don't forget to give kudos and mark it as accepted solution if your issue gets resolved.
0 Kudos
Highlighted
Visitor
Visitor
1,100 Views
Registered: ‎03-27-2018

so what's wrong with my project? (yes, as you can see, i am a freshmen)

Jump to solution


*** Running vivado
    with args -log abs_dif.vds -m64 -product Vivado -mode batch -messageDb vivado.pb -notrace -source abs_dif.tcl


****** Vivado v2017.4 (64-bit)
  **** SW Build 2086221 on Fri Dec 15 20:55:39 MST 2017
  **** IP Build 2085800 on Fri Dec 15 22:25:07 MST 2017
    ** Copyright 1986-2017 Xilinx, Inc. All Rights Reserved.

source abs_dif.tcl -notrace
Command: synth_design -top abs_dif -part xc7a35tcsg325-1
Starting synth_design
Attempting to get a license for feature 'Synthesis' and/or device 'xc7a35t'
INFO: [Common 17-349] Got license for feature 'Synthesis' and/or device 'xc7a35t'
INFO: Launching helper process for spawning children vivado processes
INFO: Helper process launched with PID 2548
---------------------------------------------------------------------------------
Starting Synthesize : Time (s): cpu = 00:00:06 ; elapsed = 00:00:06 . Memory (MB): peak = 345.473 ; gain = 101.273
---------------------------------------------------------------------------------
INFO: [Synth 8-638] synthesizing module 'abs_dif' [C:/Users/lenovo/Desktop/新建文件夹/scr/abs_dif.v:1]
INFO: [Synth 8-638] synthesizing module 'comp' [C:/Users/lenovo/Desktop/新建文件夹/scr/comp.v:1]
 Parameter n bound to: 4 - type: integer
INFO: [Synth 8-256] done synthesizing module 'comp' (1#1) [C:/Users/lenovo/Desktop/新建文件夹/scr/comp.v:1]
INFO: [Synth 8-638] synthesizing module 'mux_2to1' [C:/Users/lenovo/Desktop/新建文件夹/scr/mux_2to1.v:1]
 Parameter n bound to: 4 - type: integer
INFO: [Synth 8-256] done synthesizing module 'mux_2to1' (2#1) [C:/Users/lenovo/Desktop/新建文件夹/scr/mux_2to1.v:1]
INFO: [Synth 8-638] synthesizing module 'full_adder' [C:/Users/lenovo/Desktop/新建文件夹/scr/full_adder.v:1]
INFO: [Synth 8-256] done synthesizing module 'full_adder' (3#1) [C:/Users/lenovo/Desktop/新建文件夹/scr/full_adder.v:1]
INFO: [Synth 8-256] done synthesizing module 'abs_dif' (4#1) [C:/Users/lenovo/Desktop/新建文件夹/scr/abs_dif.v:1]
TclStackFree: incorrect freePtr. Call out of sequence?

0 Kudos
Highlighted
Moderator
Moderator
1,082 Views
Registered: ‎03-16-2017

Re: so what's wrong with my project? (yes, as you can see, i am a freshmen)

Jump to solution

Hi @alstonl,

 

Can you check your computer name?

Error might be caused by cyrillic letters in computer name.

 i.e.:  Use "User-PC" instead  "User-ПК".

 

And also i can see that your paths are like this: C:/Users/lenovo/Desktop/新建文件夹/scr/comp.v  

Try with only English letters and check as it seems a different language. 

 

Regards,

hemangd

Regards,
hemangd

Don't forget to give kudos and mark it as accepted solution if your issue gets resolved.
Highlighted
Visitor
Visitor
1,071 Views
Registered: ‎03-27-2018

make it out!! thank you soooo much!

Jump to solution
 
0 Kudos
Highlighted
Moderator
Moderator
1,455 Views
Registered: ‎03-16-2017

Re: make it out!! thank you soooo much!

Jump to solution

Hi @alstonl,

 

If your question is answered and/or your issue is solved, please mark a response that resolved your issue, as Accepted Solution (more info on this can be found here: https://forums.xilinx.com/t5/help/faqpage/faq-category-id/solutions#solutions). This way, the topic can be completed then. 

 

If this is not solved/answered, please reply in the thread.

 

Thanks in advance and have a great day.

Regards,
hemangd

Don't forget to give kudos and mark it as accepted solution if your issue gets resolved.

View solution in original post

0 Kudos