cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
u24c02
Adventurer
Adventurer
420 Views
Registered: ‎04-22-2016

Basic Question for Timing Violation at Timing Analysis

Jump to solution

Hi Sir,

What if there are Timing Violation Issue, How to fix the problem at Timing Analysis at Four categories of timing paths ?

1. Register to Register (reg2 reg)

2. Register to Output (reg2 out)

3. Input to Register (in2 reg)

4. Input to Output (in2 out) 

Tags (1)
0 Kudos
1 Solution

Accepted Solutions
yashp
Moderator
Moderator
351 Views
Registered: ‎01-16-2013

Hi,

Answer to your question is not simple. There is no straight forward or thumb rule to get it fixed all the time.

STA is a vast topic and the similar looking violations for two different path can be due to different root cause.

I would suggest you to read the documents UG903 and UG906 to understand the basics of STA.

I hope this information will be helpful.

Thanks,
Yash

 

View solution in original post

0 Kudos
1 Reply
yashp
Moderator
Moderator
352 Views
Registered: ‎01-16-2013

Hi,

Answer to your question is not simple. There is no straight forward or thumb rule to get it fixed all the time.

STA is a vast topic and the similar looking violations for two different path can be due to different root cause.

I would suggest you to read the documents UG903 and UG906 to understand the basics of STA.

I hope this information will be helpful.

Thanks,
Yash

 

View solution in original post

0 Kudos