cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Advisor
Advisor
5,398 Views
Registered: ‎12-03-2007

Cross-probing signals in ISE 11.1 Timing Analyzer

Before ISE 11.1 I could use Floorplanner to cross-probe Timing Analyzer signals.

In ISE 11.1 PlanAhead replaced Floorplanner, and there seems to be no way to do cross-probing with PlanAhead.

Cross-probing with FPGA Editor is almost useless because I cannot see floorplanning information.

Is there any workaround for this. 

0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
5,366 Views
Registered: ‎11-28-2007

You can import the timing report to PlanAhead and then do the cross-probing in PlanAhead. If you run "Analyze Tiing/Floorplan Design (PlanAhead) from Project Navigator GUI, you don't need to manually import he timing result.

 

Cheers,

Jim

Cheers,
Jim
0 Kudos