07-16-2017 11:41 PM
I try to writing bitstream of the xapp1287 for using tcl command. But after wirte bitstream completed, give some critical warning for the some of the clock paths are negative slacks, because of that timing requirements are not matched. How can I fix this error.
I add whole timing report the attachment.
07-17-2017 12:27 AM
The xapp1287 is obsolete. Please use the example design integrated in vivado 2017.1/2017.2 to generate an HDMI Example design.
In vivado 2017.1/2:
-> add the HDMI IP to your project (targeting KC705)
-> right click on the IP and select generate example design
07-17-2017 01:00 AM
I dont have kc 7705 board for this example but I have xc 706 board. This example design also use this board?
07-17-2017 02:42 AM
Yes, there is also an example design for zc706.
07-18-2017 01:44 AM
thank you for replying;
I did what you say and I create a project on ZC706 HDMI example, but SDK files are not generated how can we generate sdk file easily can we use xapp 1287 sdk file for this project.
07-18-2017 01:50 AM
07-19-2017 05:09 AM
Thanks your support. I have an another problem. I did all steps respectively on SDK. I got all connections with required cables for UART, HDMI and the others. But when debugging, operation flow is stopping in several point on codes. How to get it successfully?
Thanks. Best Regards.
07-19-2017 06:45 AM
You might have breakpoints into your code.
Could you try to do Run As instead of Debug As.
If there is still an issue, please close this post and create a new one as it is a different issue