08-16-2020 05:14 AM
is it possible to run the RFDC eval tool on the ZCU1275 evaluation board?
and if it is, could you please refer me to the relevant files or explain to me what change is needed in the eval tool files for the ZCU111 or ZCU216 boards?
i will also mention that i was told several times that the RFDC eval tool is actually the same for all the boards i mentioned, but no one could tell me what to do for the eval tool i installed for one of the boards to work with another.
08-16-2020 08:29 PM
Evaluation GUI is same , but you have to use the images corresponding to particular board
Here is procedure for ZCU1275.
08-16-2020 10:36 PM
I have read that file many times and there is nothing about the RFDC evaluation GUI.
i would please like to know what do i need to do to get this GUI (in the picture) running with the ZCU1275. step by step?
i have managed to run the SCUI and program the clock board, and i have loaded the SD card with the image files supplied in the 2020.1 package file.
but while with the ZCU111 and ZCU216 the gui connects with the board by ethernet... the ZCU1275 (as i see) doesn't have an ethernet connection so what should i do?
08-16-2020 11:25 PM
ZCU1275/1285 run flow is different and documented here.