cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
boomy
Visitor
Visitor
237 Views
Registered: ‎01-06-2020

VCU108 User SMA clock input or FMC_HPC0_CLK1_M2C clock input with LVCMOS33

Hi.

This is my first post.

I'm Using VCU108 board.

I want to give 3.3V single ended Clock input from outside via User SMA Port(J34) or FMC_HPC0_CLK1_M2C Port.

but both of them tied with 'Bank 67' which only possible for 1.5V and 1.8V.

Is there any other way to give 3.3V through SMA port?

Tags (4)
0 Kudos
1 Reply
gnarahar
Moderator
Moderator
134 Views
Registered: ‎07-23-2015

Duplicate post. Answered here: https://forums.xilinx.com/t5/Versal-and-UltraScale/VCU108-User-SMA-clock-input-or-FMC-HPC0-CLK1-M2C-clock-input/td-p/1212652

- Giri
------------------------------------------------------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
If starting with Versal take a look at our Versal Design Process Hub and our Versal Blogs
------------------------------------------------------------------------------------------------------------------------