UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
211 Views
Registered: ‎08-13-2019

how to solve over utilization of uram problem

picturemessage_uyvp2tz5.wpo.png

 

I had xczu7ev design ,i changed the part number to 4ev and upgraded the  IP to 4ev .It shows the above error when i run the synthesis for xczu4ev-fbvb900-1-i .

0 Kudos
5 Replies
Scholar u4223374
Scholar
193 Views
Registered: ‎04-26-2015

Re: how to solve over utilization of uram problem

As the error says, target a different part (ie the XCZU7EV). Or modify your design so it doesn't need as much URAM.

 

 

0 Kudos
Adventurer
Adventurer
180 Views
Registered: ‎08-13-2019

Re: how to solve over utilization of uram problem

sorry but what is it when you say modify ?

0 Kudos
178 Views
Registered: ‎06-21-2017

Re: how to solve over utilization of uram problem

The 7EV has almost twice as much URAM as the 4EV. You either must change your design to use less URAM or you must use the larger part.

0 Kudos
Adventurer
Adventurer
172 Views
Registered: ‎08-13-2019

Re: how to solve over utilization of uram problem

thank you much.

So, I cant use the design for 4ev .Incase i want to use i have to change the part number?

Regards

0 Kudos
Adventurer
Adventurer
171 Views
Registered: ‎08-13-2019

Re: how to solve over utilization of uram problem

using less uram means reducing the fpga configuratons?

Regards,

0 Kudos