UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Contributor
Contributor
203 Views
Registered: ‎08-13-2019

how to solve over utilization of uram problem

picturemessage_uyvp2tz5.wpo.png

 

I had xczu7ev design ,i changed the part number to 4ev and upgraded the  IP to 4ev .It shows the above error when i run the synthesis for xczu4ev-fbvb900-1-i .

0 Kudos
5 Replies
Scholar u4223374
Scholar
185 Views
Registered: ‎04-26-2015

Re: how to solve over utilization of uram problem

As the error says, target a different part (ie the XCZU7EV). Or modify your design so it doesn't need as much URAM.

 

 

0 Kudos
Contributor
Contributor
172 Views
Registered: ‎08-13-2019

Re: how to solve over utilization of uram problem

sorry but what is it when you say modify ?

0 Kudos
170 Views
Registered: ‎06-21-2017

Re: how to solve over utilization of uram problem

The 7EV has almost twice as much URAM as the 4EV. You either must change your design to use less URAM or you must use the larger part.

0 Kudos
Highlighted
Contributor
Contributor
164 Views
Registered: ‎08-13-2019

Re: how to solve over utilization of uram problem

thank you much.

So, I cant use the design for 4ev .Incase i want to use i have to change the part number?

Regards

0 Kudos
Contributor
Contributor
163 Views
Registered: ‎08-13-2019

Re: how to solve over utilization of uram problem

using less uram means reducing the fpga configuratons?

Regards,

0 Kudos