cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
ivanfan
Adventurer
Adventurer
554 Views
Registered: ‎06-05-2019

8T49N241 init failed in zcu104 csi rx project

I want to migrate the CSI-2 RX subsystem example design to my ZCU104 FPGA board and i found the reason that xmipi_example program didn't work might be the clock generator is 8T49N241 on zcu104 not the Si5324 on zcu102. So I modified the xmipi_example.c file. But the program displayed messages as follow

微信截图_20190910194625.png

the xmipi project can be found in the attachment

Tags (2)
3 Replies
florentw
Moderator
Moderator
512 Views
Registered: ‎11-09-2015

Hi @ivanfan 

According to the following topic, it seems that you have solve your issue:

https://forums.xilinx.com/t5/Video/iic-send-data-failed-in-csi-rx-example/m-p/1019833#M27555

Could you kindly share your solution with the community as others might face the same?

Thanks,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
karnanl
Xilinx Employee
Xilinx Employee
495 Views
Registered: ‎03-30-2016

Hello @ivanfan 
Actually , I am not familiar with this IIC IP.

Are you sure that you are setting the correct ID ?
https://forums.xilinx.com/t5/Embedded-Development-Tools/I2C-xps-IIC-does-not-sending-data/td-p/47651

Hope this helps.


------------------------------------------------------------------------------------------------

Don’t forget to reply, kudo, and accept as solution.

If starting with Versal take a look at our Versal Design Process Hub and our
Versal Blogs

------------------------------------------------------------------------------------------------
0 Kudos
284 Views
Registered: ‎10-17-2019

Hi ,

Are you able to get clock output from 8T49N241 on target device ZCU104? If yes could you please help us!

We are trying to get the clock from 8T49N241 at output port and our target device is ZCU104.

0 Kudos