cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
pierlum
Voyager
Voyager
992 Views
Registered: ‎05-30-2017

Artix 7 MGT SD-SDI only mode

Jump to solution

Hello I'm working with artix 7 and vivado 2017.4. I'm searching for an example design or IP very simple to receive or transmit SDI video only SD. I found xapp 1097 Using Artix-7 GTP Transceivers for SDI Interfaces, but I'm searching for something more simple only SD. Thank you.

0 Kudos
1 Solution

Accepted Solutions
florentw
Moderator
Moderator
1,116 Views
Registered: ‎11-09-2015

Hello @pierlum,

 

There is no "easier" example design from Xilinx to do only SD.

 

The reason for this is because the SDI IP can do SD/HD/3G-SDI so Xilinx shows the 3 bit rates.

 

But you can start from the xapp1097 and try to simplify it to do only SD-SDI

 

Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post

1 Reply
florentw
Moderator
Moderator
1,117 Views
Registered: ‎11-09-2015

Hello @pierlum,

 

There is no "easier" example design from Xilinx to do only SD.

 

The reason for this is because the SDI IP can do SD/HD/3G-SDI so Xilinx shows the 3 bit rates.

 

But you can start from the xapp1097 and try to simplify it to do only SD-SDI

 

Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post