cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor
Visitor
2,592 Views
Registered: ‎10-12-2017

DisplayPort: no picture on ZCU102

 

  I'm trying to run the tricube application on a Linux and viewing the result on the display port.

  ( ug1209-embedded-design-tutorial.pdf)

  however, i can't see a tricube on the display port only black screen shown.

  and the following message appears "Entering power save mode. (used dell u2711 monitor)

  Could you let mo know the solution?
 

root@plnx_aarch64:~# cp /run/media/mmcblk0p1/tricube /tmp
root@plnx_aarch64:~# export DISPLAY=:0.0
root@plnx_aarch64:~# /usr/bin/Xorg -depth 16&
[1] 2012

X.Org X Server 1.18.0
Release Date: 2015-11-09
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.10.0-327.el7.x86_64 x86_64
Current Operating System: Linux plnx_aarch64 4.6.0-xilinx #1 SMP Tue Feb 7 10:58:38 IST 2017 aarch64
Kernel command line: earlycon=cdns,mmio,0xFF000000,115200n8
Build Date: 23 January 2017  02:32:35PM

Current version of pixman: 0.32.8
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 13 05:31:54 2017
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
root@plnx_aarch64:~# /tmp/tricube
Start Main
Calling OpenDisplay
Calling XCreateSimpleWindow
Calling XStoreName
Calling XMapWindow
Calling prepareGraphics
Calling eglGetDisplay
Display Used 0x1 & EGL versions are 1.4
Your EGL Version is "1.4 Linux-r5p1-01rel0"
Your EGL Vendor is "ARM"
Calling doGraphics
iLocPosition = 0
iLocColor   = 1
iLocMVP = 0

 

 

 

0 Kudos
7 Replies
Highlighted
Mentor
Mentor
2,583 Views
Registered: ‎06-16-2013

Re: DisplayPort: no picture on ZCU102

Hi @karen

 

It seems that DisplayPort Tx goes to "Power Save mode" from "Normal mode" by no-signal.

Could you show me "Xorg.0.log" and "xorg.cong" file ?

 

Thank you.

Best regards,

 

0 Kudos
Highlighted
Visitor
Visitor
2,570 Views
Registered: ‎10-12-2017

Re: DisplayPort: no picture on ZCU102

xorg.cong

 

Section "InputDevice"
        Identifier      "System Mouse"
        Driver          "mouse"
        Option          "Device" "/dev/input/mouse0"
EndSection

Section "InputDevice"
        Identifier      "System Keyboard"
        Driver          "kbd"
        Option          "Device" "/dev/input/event0"
EndSection

Section "Device"
        Identifier      "ZynqMP"
        Driver          "armsoc"
        Option          "DRI2"                  "true"
        Option          "DRI2_PAGE_FLIP"        "false"
        Option          "DRI2_WAIT_VSYNC"       "true"
        Option          "SWcursorLCD"           "false"
        Option          "DEBUG"                 "false"
EndSection

Section "Screen"
        Identifier      "DefaultScreen"
        Device          "ZynqMP"
        DefaultDepth    16
EndSection
~

 

0 Kudos
Highlighted
Mentor
Mentor
2,563 Views
Registered: ‎06-16-2013

Re: DisplayPort: no picture on ZCU102

Hi @karen

 

I suspect wrong setting is " DefaultDepth" as 16 in xorg.conf.

However, I'd like to confirm log file.

So, would you show me xorg.log file like "Xorg.0.log" in /var/log/ ?

 

Thank you.

Best regards,

 

0 Kudos
Highlighted
Visitor
Visitor
2,562 Views
Registered: ‎10-12-2017

Re: DisplayPort: no picture on ZCU102

 

Hi @watari

 

 Xorg.0.log

 

[345323.044]
X.Org X Server 1.18.0
Release Date: 2015-11-09
[345323.044] X Protocol Version 11, Revision 0
[345323.044] Build Operating System: Linux 3.10.0-327.el7.x86_64 x86_64
[345323.044] Current Operating System: Linux plnx_aarch64 4.6.0-xilinx #1 SMP Tue Feb 7 10:58:38 IST 2017 aarch64
[345323.044] Kernel command line: earlycon=cdns,mmio,0xFF000000,115200n8
[345323.044] Build Date: 23 January 2017  02:32:35PM
[345323.044]
[345323.044] Current version of pixman: 0.32.8
[345323.044]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[345323.044] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[345323.044] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 13 07:14:03 2017
[345323.044] (==) Using config file: "/etc/X11/xorg.conf"
[345323.044] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[345323.045] (==) No Layout section.  Using the first Screen section.
[345323.045] (**) |-->Screen "DefaultScreen" (0)
[345323.045] (**) |   |-->Monitor "<default monitor>"
[345323.045] (**) |   |-->Device "ZynqMP"
[345323.045] (==) No monitor specified for screen "DefaultScreen".
        Using a default monitor configuration.
[345323.045] (==) Automatically adding devices
[345323.045] (==) Automatically enabling devices
[345323.045] (==) Automatically adding GPU devices
[345323.045] (==) Max clients allowed: 256, resource mask: 0x1fffff
[345323.045] (WW) The directory "/usr/share/fonts/X11/misc/" does not exist.
[345323.045]    Entry deleted from font path.
[345323.045] (WW) The directory "/usr/share/fonts/X11/TTF/" does not exist.
[345323.045]    Entry deleted from font path.
[345323.045] (WW) The directory "/usr/share/fonts/X11/OTF/" does not exist.
[345323.045]    Entry deleted from font path.
[345323.045] (WW) The directory "/usr/share/fonts/X11/Type1/" does not exist.
[345323.045]    Entry deleted from font path.
[345323.045] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[345323.045]    Entry deleted from font path.
[345323.045] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[345323.045]    Entry deleted from font path.
[345323.045] (==) FontPath set to:

[345323.045] (==) ModulePath set to "/usr/lib/xorg/modules"
[345323.045] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[345323.045] (II) Loader magic: 0x5b5640
[345323.045] (II) Module ABI versions:
[345323.046]    X.Org ANSI C Emulation: 0.4
[345323.046]    X.Org Video Driver: 20.0
[345323.046]    X.Org XInput driver : 22.1
[345323.046]    X.Org Server Extension : 9.0
[345323.046] (II) xfree86: Adding drm device (/dev/dri/card0)
[345323.046] (II) no primary bus or device found
[345323.046]    falling back to /sys/devices/platform/amba/amba:xilinx_drm/drm/card0
[345323.046] (II) LoadModule: "glx"
[345323.047] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[345323.052] (II) Module glx: vendor="X.Org Foundation"
[345323.052]    compiled for 1.18.0, module version = 1.0.0
[345323.052]    ABI class: X.Org Server Extension, version 9.0
[345323.052] (==) AIGLX enabled
[345323.052] (II) LoadModule: "armsoc"
[345323.052] (II) Loading /usr/lib/xorg/modules/drivers/armsoc_drv.so
[345323.052] (II) Module armsoc: vendor="X.Org Foundation"
[345323.052]    compiled for 1.18.0, module version = 1.1.0
[345323.052]    Module class: X.Org Video Driver
[345323.052]    ABI class: X.Org Video Driver, version 20.0
[345323.052] (II) ARMSOC: Driver for ARM Mali compatible chipsets
[345323.052] (--) using VT number 3

[345323.066] (WW) Falling back to old probe method for armsoc
[345323.066] (II) No BusID or DriverName specified - opening /dev/dri/card0
[345323.066] (II) Got BusID
[345323.066] (II) Opened DRM
[345323.066] (II)    DeviceName is [/dev/dri/card0]
[345323.066] (II)    bus_id is []
[345323.066] (II)    DriverName is [xilinx_drm]
[345323.066] (II)    version is [1.0.0]
[345323.066] (II) Screen:0,  CRTC:-1
[345323.067] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[345323.067] (II) ARMSOC(0): Creating default Display subsection in Screen section
        "DefaultScreen" for depth/fbbpp 16/16
[345323.067] (++) ARMSOC(0): Depth 16, (--) framebuffer bpp 16
[345323.067] (==) ARMSOC(0): RGB weight 565
[345323.067] (==) ARMSOC(0): Using gamma correction (1.0, 1.0, 1.0)
[345323.067] (==) ARMSOC(0): Default visual is TrueColor
[345323.067] (II) No BusID or DriverName specified - opening /dev/dri/card0
[345323.067] (II) Got BusID
[345323.067] (II) Opened DRM
[345323.067] (II)    DeviceName is [/dev/dri/card0]
[345323.067] (II)    bus_id is []
[345323.067] (II)    DriverName is [xilinx_drm]
[345323.067] (II)    version is [1.0.0]
[345323.067] (II) ARMSOC(0): Chipset: Mali
[345323.067] (**) ARMSOC(0): Option "Debug" "false"
[345323.067] (II) ARMSOC(0): Buffer Flipping is Enabled
[345323.067] (II) ARMSOC(0): umplock is Enabled
[345323.067] (II) ARMSOC(0): Setting the video modes ...
[345323.067] (II) ARMSOC(0): Adding all CRTCs
[345323.067] (II) ARMSOC(0): Got CRTC: 0 (id: 27)
[345323.101] (II) ARMSOC(0): Output DP-1 has no monitor section
[345323.134] (II) ARMSOC(0): EDID for output DP-1
[345323.134] (II) ARMSOC(0): Manufacturer: DEL  Model: a057  Serial#: 810441036
[345323.134] (II) ARMSOC(0): Year: 2011  Week: 20
[345323.134] (II) ARMSOC(0): EDID Version: 1.4
[345323.134] (II) ARMSOC(0): Digital Display Input
[345323.134] (II) ARMSOC(0): 10 bits per channel
[345323.134] (II) ARMSOC(0): Digital interface is DisplayPort
[345323.134] (II) ARMSOC(0): Max Image Size [cm]: horiz.: 60  vert.: 34
[345323.134] (II) ARMSOC(0): Gamma: 2.20
[345323.134] (II) ARMSOC(0): DPMS capabilities: Off
[345323.134] (II) ARMSOC(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
[345323.134] (II) ARMSOC(0): First detailed timing is preferred mode
[345323.134] (II) ARMSOC(0): Preferred mode is native pixel format and refresh rate
[345323.134] (II) ARMSOC(0): redX: 0.678 redY: 0.309   greenX: 0.202 greenY: 0.689
[345323.134] (II) ARMSOC(0): blueX: 0.148 blueY: 0.051   whiteX: 0.313 whiteY: 0.329
[345323.134] (II) ARMSOC(0): Supported established timings:
[345323.134] (II) ARMSOC(0): 720x400@70Hz
[345323.134] (II) ARMSOC(0): 640x480@60Hz
[345323.134] (II) ARMSOC(0): 640x480@75Hz
[345323.134] (II) ARMSOC(0): 800x600@60Hz
[345323.134] (II) ARMSOC(0): 800x600@75Hz
[345323.134] (II) ARMSOC(0): 1024x768@60Hz
[345323.134] (II) ARMSOC(0): 1024x768@75Hz
[345323.134] (II) ARMSOC(0): 1280x1024@75Hz
[345323.134] (II) ARMSOC(0): Manufacturer's mask: 0
[345323.134] (II) ARMSOC(0): Supported standard timings:
[345323.134] (II) ARMSOC(0): #0: hsize: 1280  vsize 800  refresh: 60  vid: 129
[345323.134] (II) ARMSOC(0): #1: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[345323.134] (II) ARMSOC(0): #2: hsize: 1920  vsize 1200  refresh: 60  vid: 209
[345323.134] (II) ARMSOC(0): #3: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[345323.135] (II) ARMSOC(0): #4: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[345323.135] (II) ARMSOC(0): #5: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[345323.135] (II) ARMSOC(0): Supported detailed timing:
[345323.135] (II) ARMSOC(0): clock: 241.5 MHz   Image Size:  597 x 336 mm
[345323.135] (II) ARMSOC(0): h_active: 2560  h_sync: 2608  h_sync_end 2640 h_blank_end 2720 h_border: 0
[345323.135] (II) ARMSOC(0): v_active: 1440  v_sync: 1443  v_sync_end 1448 v_blanking: 1481 v_border: 0
[345323.135] (II) ARMSOC(0): Serial No: F693T15A0NYL
[345323.135] (II) ARMSOC(0): Monitor name: DELL U2711
[345323.135] (II) ARMSOC(0): Ranges: V min: 49 V max: 86 Hz, H min: 29 H max: 113 kHz, PixClock max 305 MHz
[345323.135] (II) ARMSOC(0): Supported detailed timing:
[345323.135] (II) ARMSOC(0): clock: 148.5 MHz   Image Size:  597 x 336 mm
[345323.135] (II) ARMSOC(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[345323.135] (II) ARMSOC(0): v_active: 1080  v_sync: 1082  v_sync_end 1087 v_blanking: 1125 v_border: 0
[345323.135] (II) ARMSOC(0): Supported detailed timing:
[345323.135] (II) ARMSOC(0): clock: 74.2 MHz   Image Size:  597 x 336 mm
[345323.135] (II) ARMSOC(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[345323.135] (II) ARMSOC(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[345323.135] (II) ARMSOC(0): Supported detailed timing:
[345323.135] (II) ARMSOC(0): clock: 74.2 MHz   Image Size:  597 x 336 mm
[345323.135] (II) ARMSOC(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[345323.135] (II) ARMSOC(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[345323.135] (II) ARMSOC(0): Supported detailed timing:
[345323.135] (II) ARMSOC(0): clock: 27.0 MHz   Image Size:  597 x 336 mm
[345323.135] (II) ARMSOC(0): h_active: 720  h_sync: 736  h_sync_end 798 h_blank_end 858 h_border: 0
[345323.135] (II) ARMSOC(0): v_active: 480  v_sync: 489  v_sync_end 495 v_blanking: 525 v_border: 0
[345323.135] (II) ARMSOC(0): Number of EDID sections to follow: 1
[345323.135] (II) ARMSOC(0): EDID (in hex):
[345323.135] (II) ARMSOC(0):    00ffffffffffff0010ac57a04c594e30
[345323.135] (II) ARMSOC(0):    14150104b53c22783a8e05ad4f33b026
[345323.135] (II) ARMSOC(0):    0d5054a54b008100b300d100714fa940
[345323.135] (II) ARMSOC(0):    818001010101565e00a0a0a029503020
[345323.135] (II) ARMSOC(0):    350055502100001a000000ff00463639
[345323.135] (II) ARMSOC(0):    3354313541304e594c0a000000fc0044
[345323.135] (II) ARMSOC(0):    454c4c2055323731310a2020000000fd
[345323.135] (II) ARMSOC(0):    0031561d711e000a202020202020012e
[345323.135] (II) ARMSOC(0):    02031df1509005040302071601061112
[345323.135] (II) ARMSOC(0):    1513141f20230d7f07830f0000023a80
[345323.135] (II) ARMSOC(0):    1871382d40582c250055502100001e01
[345323.135] (II) ARMSOC(0):    1d8018711c1620582c25005550210000
[345323.135] (II) ARMSOC(0):    9e011d007251d01e206e285500555021
[345323.135] (II) ARMSOC(0):    00001e8c0ad08a20e02d10103e960055
[345323.135] (II) ARMSOC(0):    50210000180000000000000000000000
[345323.135] (II) ARMSOC(0):    0000000000000000000000000000004b
[345323.135] (II) ARMSOC(0): EDID vendor "DEL", prod id 41047
[345323.135] (II) ARMSOC(0): Using EDID range info for horizontal sync
[345323.135] (II) ARMSOC(0): Using EDID range info for vertical refresh
[345323.135] (II) ARMSOC(0): Printing DDC gathered Modelines:
[345323.135] (II) ARMSOC(0): Modeline "2560x1440"x0.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (8

345323.135] (II) ARMSOC(0): Modeline "2560x1440"x0.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (8
[345323.135] (II) ARMSOC(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1082 1087 1125 +hsync +vsync (6
[345323.136] (II) ARMSOC(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsyn
[345323.136] (II) ARMSOC(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 k
[345323.136] (II) ARMSOC(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[345323.136] (II) ARMSOC(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e
[345323.136] (II) ARMSOC(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[345323.136] (II) ARMSOC(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[345323.136] (II) ARMSOC(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[345323.136] (II) ARMSOC(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (8
[345323.136] (II) ARMSOC(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 k
[345323.136] (II) ARMSOC(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 k
[345323.136] (II) ARMSOC(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e
[345323.136] (II) ARMSOC(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 k
[345323.136] (II) ARMSOC(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (6
[345323.136] (II) ARMSOC(0): Modeline "1920x1200"x0.0  193.25  1920 2056 2256 2592  1200 1203 1209 1245 -hsync +vsync (7
[345323.136] (II) ARMSOC(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 k
[345323.136] (II) ARMSOC(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (7
[345323.136] (II) ARMSOC(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (6
[345323.136] (II) ARMSOC(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[345323.136] (II) ARMSOC(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vs
[345323.136] (II) ARMSOC(0): Modeline "1440x240"x0.0   27.00  1440 1478 1602 1716  240 244 247 262 -hsync -vsync (15.7 k
[345323.136] (II) ARMSOC(0): Modeline "1440x288"x0.0   27.00  1440 1464 1590 1728  288 290 293 312 -hsync -vsync (15.6 k
[345323.136] (II) ARMSOC(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 k
[345323.136] (II) ARMSOC(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vs
[345323.136] (II) ARMSOC(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsyn
[345323.136] (II) ARMSOC(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (2
[345323.136] (II) ARMSOC(0): Modeline "1920x1080"x0.0   74.25  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (2
[345323.136] (II) ARMSOC(0): Printing probed modes for output DP-1
[345323.136] (II) ARMSOC(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1082 1087 1125 +hsync +vsync (
[345323.136] (II) ARMSOC(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (
[345323.136] (II) ARMSOC(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (
[345323.136] (II) ARMSOC(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (
[345323.136] (II) ARMSOC(0): Modeline "1920x1080"x24.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (
[345323.136] (II) ARMSOC(0): Modeline "1920x1080"x24.0   74.18  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (
[345323.136] (II) ARMSOC(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (
[345323.136] (II) ARMSOC(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (
[345323.136] (II) ARMSOC(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (
[345323.136] (II) ARMSOC(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (
[345323.136] (II) ARMSOC(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7
[345323.136] (II) ARMSOC(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5
[345323.136] (II) ARMSOC(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0
[345323.136] (II) ARMSOC(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5
[345323.136] (II) ARMSOC(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0
[345323.136] (II) ARMSOC(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0
[345323.137] (II) ARMSOC(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4
[345323.137] (II) ARMSOC(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz
[345323.137] (II) ARMSOC(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz
[345323.137] (II) ARMSOC(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e
[345323.137] (II) ARMSOC(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e
[345323.137] (II) ARMSOC(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e
[345323.137] (II) ARMSOC(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e
[345323.137] (II) ARMSOC(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e
[345323.137] (II) ARMSOC(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e
[345323.137] (II) ARMSOC(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e
[345323.137] (II) ARMSOC(0): Output DP-1 connected
[345323.137] (II) ARMSOC(0): Using exact sizes for initial modes
[345323.137] (II) ARMSOC(0): Output DP-1 using initial mode 1920x1080 +0+0
[345323.137] (II) ARMSOC(0): Got KMS resources
[345323.137] (**) ARMSOC(0): Display dimensions: (600, 340) mm
[345323.137] (**) ARMSOC(0): DPI set to (81, 80)
[345323.137] (II) Loading sub module "dri2"
[345323.137] (II) LoadModule: "dri2"
[345323.137] (II) Module "dri2" already built-in
[345323.137] (II) Loading sub module "exa"
[345323.137] (II) LoadModule: "exa"
[345323.137] (II) Loading /usr/lib/xorg/modules/libexa.so
[345323.137] (II) Module exa: vendor="X.Org Foundation"
[345323.137]    compiled for 1.18.0, module version = 2.6.0
[345323.137]    ABI class: X.Org Video Driver, version 20.0
[345323.137] (II) Loading sub module "fb"
[345323.137] (II) LoadModule: "fb"
[345323.137] (II) Loading /usr/lib/xorg/modules/libfb.so
[345323.138] (II) Module fb: vendor="X.Org Foundation"
[345323.138]    compiled for 1.18.0, module version = 1.0.0
[345323.138]    ABI class: X.Org ANSI C Emulation, version 0.4
[345323.140] (II) ARMSOC(0): Soft EXA mode
[345323.140] (II) EXA(0): Driver allocated offscreen pixmaps
[345323.140] (II) EXA(0): Driver registered support for the following operations:
[345323.140] (II)         Solid
[345323.140] (II)         Copy
[345323.140] (II)         Composite (RENDER acceleration)
[345323.140] (II) ARMSOC(0): Setting swap chain size: 2
[345323.140] (II) ARMSOC(0): [DRI2] Setup complete
[345323.140] (II) ARMSOC(0): [DRI2]   DRI driver: armsoc
[345323.140] (==) ARMSOC(0): Backing store enabled
[345323.140] (==) ARMSOC(0): Silken mouse enabled
[345323.140] (II) ARMSOC(0): HW cursor init()
[345323.140] (II) ARMSOC(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[345323.141] (==) ARMSOC(0): DPMS enabled
[345323.141] (--) RandR disabled
[345323.141] (EE) AIGLX error: dlopen of /usr/lib/dri/armsoc_dri.so failed (/usr/lib/dri/armsoc_dri.so: cannot open shar
[345323.141] (EE) AIGLX: reverting to software rendering
[345323.150] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[345323.151] (II) AIGLX: Loaded and initialized swrast
[345323.151] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[345323.151] (II) ARMSOC(0): Setting screen physical size to 508 x 285

0 Kudos
Highlighted
Mentor
Mentor
2,534 Views
Registered: ‎06-16-2013

Re: DisplayPort: no picture on ZCU102

Hi @karen

 

Would you try to change value of "DefaultDepth" from 16 to 24 ?

 

[Reason]

"Dell monitor" only support the following color encoding.

 

> [345323.134] (II) ARMSOC(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2

 

However, it described as "DefaultDepth = 16" on xorg.conf.

 

> [345323.067] (II) ARMSOC(0): Creating default Display subsection in Screen section
>        "DefaultScreen" for depth/fbbpp 16/16
> [345323.067] (++) ARMSOC(0): Depth 16, (--) framebuffer bpp 16

 

Therefore, I'm sure, DisplayPort malfunctions to output video data as RGB=565 (16bit), which is not supported, to "Dell monitor". Then "Dell monitor" displays black screen.

 

[Note]

BTW, the resolution of this "Dell monitor (U2711)" is "2560x1440". It's little special.

I suggest to change another DP monitor, if you have another monitor with DP.

 

Thank you.

Best regards,

 

0 Kudos
Highlighted
Visitor
Visitor
2,515 Views
Registered: ‎10-12-2017

Re: DisplayPort: no picture on ZCU102

 

Thanks very much for your help. The problem is finally settled.

 

however, I have a one more question.

I'm trying to run the tricube application use another BOOT.bin and image.ub file  

then, the following error message appears(red color).

 

Thank you in advance...........

 

root@xilinx-zcu102-zu9-es2-rev1_0-2017:~# export DISPLAY=:0.0
root@xilinx-zcu102-zu9-es2-rev1_0-2017:~# /usr/bin/Xorg -depth 16&
[1] 2223

X.Org X Server 1.18.4
Release Date: 2016-07-19
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-573.el6.x86_64 x86_64
Current Operating System: Linux xilinx-zcu102-zu9-es2-rev1_0-2017.2 4.9.0 #1 SMP Sun Oct 8 00:35:48 KST 2017 aarch64
Kernel command line: earlycon clk_ignore_unused
Build Date: 19 June 2017  09:37:47PM

Current version of pixman: 0.34.0
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 13 10:22:41 2017
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
root@xilinx-zcu102-zu9-es2-rev1_0-2017:~# /tmp/tricube
/tmp/tricube: error while loading shared libraries: libMali.so.1: cannot open shared object file: No such file or directory

 

0 Kudos
Highlighted
Mentor
Mentor
2,473 Views
Registered: ‎06-16-2013

Re: DisplayPort: no picture on ZCU102

Hi @karen

 

I guess that the following URL is helpful for you.

Please refer the following URL.

 

http://www.wiki.xilinx.com/Zynq+UltraScale%EF%BC%8BMPSoC+Graphics-+GPU+application+debugging+using+ARM+Mali+Graphics+Debugger+tool

 

But, it has mistake in this content.

"ln -s /usr/lib/libMali.so.7 /usr/lib/libMaliso.1" shall be replaced with "ln -s /usr/lib/libMali.so.7 /usr/lib/libMali.so.1".

 

Thank you.

Best regards,

 

 

0 Kudos