cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
1,403 Views
Registered: ‎06-13-2012

Displayport 1.4 and MCDP6000

Jump to solution

Hi,

 

I'm working on a custom prototype board with DisplayPort, actually I used the DP159 as specified by product guide PG233, now I found a new product guide PG300, it uses the MCDP6000 as a retimer to reach 8K 30Hz.

Actually I can't find a demo board or an reference design/schematic to understand the effort to start using the new retimer in the next revision of our board, where I can find more info?

 

 

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
1,570 Views
Registered: ‎11-09-2015

Hi @auricm,

 

There should be one FMC card produced by Inrevium but it is not available yet. But we have a reference design ready as per pg300.

 

My recommendation is to contact your FAE (ask him to contact marketing for this).

 

Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post

3 Replies
Highlighted
Moderator
Moderator
1,571 Views
Registered: ‎11-09-2015

Hi @auricm,

 

There should be one FMC card produced by Inrevium but it is not available yet. But we have a reference design ready as per pg300.

 

My recommendation is to contact your FAE (ask him to contact marketing for this).

 

Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post

Observer
Observer
946 Views
Registered: ‎02-15-2019

Hi,

can you please tell me, where the mentioned reference design for displayport 1.4 subsystem using the inrevium displayport 1.4 FMC-card is available.

We have an ZCU102-Board as well as the displayport 1.4 FMC card TB-FMCH-VFMC-DP available here.

Thanks and best regards

Michael Tornow

0 Kudos
Highlighted
Moderator
Moderator
942 Views
Registered: ‎11-09-2015

HI @rumburak,

Refer to chapter 6 of PG299 or PG300 for the example design.

Please create a new topic if you have any question (I am closing this topic for new replies as already solved)

Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos