cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
yashaswini.shankar
Participant
Participant
891 Views
Registered: ‎07-24-2019

ERROR: [Hsi 55-1545] Problem running tcl command ::sw_vproc_ss::generate : ERROR: [Common 17-161] Invalid option value '' specified for 'object'. Hai All,

-In the design we are using video processing subsystem IP for scaling but during generation of device tree in sdk we are facing below error

-Same is repeated when we tried to build project in petalinux 18.3 for our custom board

-SDK used 18.3

ERROR: device-tree-xilinx+gitAUTOINC+b7466bbeee-r0 do_configure: Function failed: do_configure (log file is located at /home/yashaswini/Project/ASCE4/iWave_proj_4eg_18.3/build/tmp/work/plnx_zynqmp-xilinx-linux/device-tree/xilinx+gitAUTOINC+b7466bbeee-r0/temp/log.do_configure.4561)

ERROR: Logfile of failure stored in: /home/yashaswini/Project/ASCE4/iWave_proj_4eg_18.3/build/tmp/work/plnx_zynqmp-xilinx-linux/device-tree/xilinx+gitAUTOINC+b7466bbeee-r0/temp/log.do_configure.4561 Log data follows: |

DEBUG: Executing shell function do_configure | MISC_ARG is -hdf_type hdf -yamlconf /home/yashaswini/Project/ASCE4/iWave_proj_4eg_18.3/build/tmp/work/plnx_zynqmp-xilinx-linux/device-tree/xilinx+gitAUTOINC+b7466bbeee-r0/device-tree.yaml | APP_ARG is -app "device-tree" |

Using xsct from: /home/yashaswini/petalinux_18.3/tools/xsct/SDK/2018.3/bin/xsct | cmd is: xsct -sdx -nodisp /home/yashaswini/Project/ASCE4/iWave_proj_4eg_18.3/build/tmp/work/plnx_zynqmp-xilinx-linux/device-tree/xilinx+gitAUTOINC+b7466bbeee-r0/dtgen.tcl -ws /home/yashaswini/Project/ASCE4/iWave_proj_4eg_18.3/build/../components/plnx_workspace/device-tree -pname device-tree -rp /home/yashaswini/Project/ASCE4/iWave_proj_4eg_18.3/build/tmp/work/plnx_zynqmp-xilinx-linux/device-tree/xilinx+gitAUTOINC+b7466bbeee-r0/git -processor psu_cortexa53_0 -hdf /home/yashaswini/Project/ASCE4/iWave_proj_4eg_18.3/build/tmp/deploy/images/plnx-zynqmp/Xilinx-plnx-zynqmp.hdf -arch 64 -app "device-tree" -hdf_type hdf -yamlconf /home/yashaswini/Project/ASCE4/iWave_proj_4eg_18.3/build/tmp/work/plnx_zynqmp-xilinx-linux/device-tree/xilinx+gitAUTOINC+b7466bbeee-r0/device-tree.yaml |

INFO: [Hsi 55-1698] elapsed time for repository loading 0 seconds | hsi::open_hw_design: Time (s): cpu = 00:00:06 ; elapsed = 00:00:07 . Memory (MB): peak = 783.754 ; gain = 174.000 ; free physical = 28463 ; free virtual = 30829 |

WARNING: Interrupt pin "irq" of IP block: "SDI_OUT_SDI_OUT1_v_tc_0" is not connected to any interrupt controller | | WARNING: not supported pl_clk: | WARNING: no s_axi_aclk for clockwizard | WARNING: not supported pl_clk: |

WARNING: no s_axi_aclk for clockwizard | WARNING: not supported pl_clk: |

WARNING: no s_axi_aclk for clockwizard | WARNING: not supported pl_clk: |

WARNING: no s_axi_aclk for clockwizard | WARNING: not supported pl_clk: |

WARNING: no s_axi_aclk for clockwizard | WARNING: not supported pl_clk: |

WARNING: quotes to be removed or use 2018.1 version for &sata params param0..param7 | WARNING: quotes to be removed or use 2018.1 version for &sata params param0..param7 |

WARNING: quotes to be removed or use 2018.1 version for &sata params param0..param7 |

WARNING: quotes to be removed or use 2018.1 version for &sata params param0..param7 |

WARNING: quotes to be removed or use 2018.1 version for &sata params param0..param7 | WARNING: quotes to be removed or use 2018.1 version for &sata params param0..param7 |

WARNING: quotes to be removed or use 2018.1 version for &sata params param0..param7 |

WARNING: quotes to be removed or use 2018.1 version for &sata params param0..param7 |

WARNING: Frequency 33.333333 used instead of 33.333 |

WARNING: Only boolean type can have empty value. Fail to add driver(ddr4_v_frmbuf_wr_0) property(reg) type(intlist) value() | WARNING: Please add the property manually |

WARNING: Only boolean type can have empty value. Fail to add driver(ddr4_v_proc_ss_0) property(reg) type(intlist) value() |

WARNING: Please add the property manually |

ERROR: [Common 17-161] Invalid option value '' specified for 'object'. |

ERROR: [Hsi 55-1545] Problem running tcl command ::sw_vproc_ss::generate :

ERROR: [Common 17-161] Invalid option value '' specified for 'object'. | | while executing | "get_property IP_NAME $in_ip" | (procedure "::sw_vproc_ss::generate" line 61) |

invoked from within | "::sw_vproc_ss::generate ddr4_v_proc_ss_0" |

ERROR: [Hsi 55-1442] Error(s) while running TCL procedure generate() | hsi::generate_target: Time (s): cpu = 00:00:06 ; elapsed = 00:00:07 . Memory (MB): peak = 798.754 ; gain = 15.000 ; free physical = 28419 ; free virtual = 30786 | generate_target failed | while executing | "error "generate_target failed"" | invoked from within |

"if {[catch {hsi generate_target -dir $project} res]} { | error "generate_target failed" | }" |

(file "/home/yashaswini/Project/ASCE4/iWave_proj_4eg_18.3/build/tmp/work/plnx_zynqmp-xilinx-linux/device-tree/xilinx+gitAUTOINC+b7466bbeee-r0/dtgen.tcl" line 38) | WARNING: exit code 1 from a shell command. |

ERROR: Function failed: do_configure (log file is located at /home/yashaswini/Project/ASCE4/iWave_proj_4eg_18.3/build/tmp/work/plnx_zynqmp-xilinx-linux/device-tree/xilinx+gitAUTOINC+b7466bbeee-r0/temp/log.do_configure.4561)

ERROR: Task (/home/yashaswini/petalinux_18.3/components/yocto/source/aarch64/layers/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/device-tree.bb:do_configure) failed with exit code '1'

NOTE: Tasks Summary: Attempted 7417 tasks of which 7416 didn't need to be rerun and 1 failed. Summary: 1 task failed: /home/yashaswini/petalinux_18.3/components/yocto/source/aarch64/layers/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/device-tree.bb:do_configure Summary: There was 1 ERROR message shown, returning a non-zero exit code. ERROR: Failed to build project

Can anyone help me to resolve this issue ?

Regards

Yashaswini

0 Kudos
3 Replies
florentw
Moderator
Moderator
842 Views
Registered: ‎11-09-2015

Hi @yashaswini.shankar 

Could you share your HDF file this way I can reporduce the issue on my end and analyse?

Thanks


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos
yashaswini.shankar
Participant
Participant
808 Views
Registered: ‎07-24-2019

Hai @florentw ,

Thank you for your reply.I have attached hdf file along with this reply.Please go through and let me know about the changes.

 

 

 

 

Thank you

Regards,

Yashaswini

0 Kudos
florentw
Moderator
Moderator
754 Views
Registered: ‎11-09-2015

HI @yashaswini.shankar 

The issue is happening because the Device tree generator is not expecting to have the AXI4-Stream Subset converter connected to an external AXI4-Stream interface.

I have create the simple patch attched for petalinux. To install the patch

  • Copy the patch to project-spec/meta-user/recipes-bsp/device-tree/files
  • update the device-tree.bbappend as follows
    FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
    
    SRC_URI += "file://system-user.dtsi"
    
    SRC_URI_append += " file://0001-Fix-external-AXI4S-interface-to-AXI4S-converter-for.patch"

Regards


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
0 Kudos