cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
6,168 Views
Registered: ‎08-12-2013

Error occurred during "Rate and Type Error Checking".

Jump to solution

The ip port has data type Bool.
The ip port must be a signed or unsigned signal.

Error occurred during "Rate and Type Error Checking".

 

 

Means the ip port has data type bool but it should be signed or unsigned.


But my inputs are unsigned & not even a single block has data type bool but still i am getting this error. why?

 

What is the meaning for the sentence "Rate and Type Error Checking"?

Hemanth
0 Kudos
1 Solution

Accepted Solutions
Highlighted
Xilinx Employee
Xilinx Employee
9,427 Views
Registered: ‎07-11-2011

Re: Error occurred during "Rate and Type Error Checking".

Jump to solution

Hi,

 

The error occurs when you map an input to a port that is different interms of data type and sampling rate.

Please check if the data types are same and also try with 1 sampling rate for all blocks.

Data type may not be only Bool and signed and unsigned but number of bits and precision like binary points also matter.

Check the gateways or module ports that the error is occuring.

Else show your mdl for more inputs

 

 

Regards,

Vanitha

---------------------------------------------------------------------------------------------
Please do google search before posting, you may find relavant information.
Mark the post - "Accept as solution" and give kudos if information provided is helpful and reply oriented

View solution in original post

1 Reply
Highlighted
Xilinx Employee
Xilinx Employee
9,428 Views
Registered: ‎07-11-2011

Re: Error occurred during "Rate and Type Error Checking".

Jump to solution

Hi,

 

The error occurs when you map an input to a port that is different interms of data type and sampling rate.

Please check if the data types are same and also try with 1 sampling rate for all blocks.

Data type may not be only Bool and signed and unsigned but number of bits and precision like binary points also matter.

Check the gateways or module ports that the error is occuring.

Else show your mdl for more inputs

 

 

Regards,

Vanitha

---------------------------------------------------------------------------------------------
Please do google search before posting, you may find relavant information.
Mark the post - "Accept as solution" and give kudos if information provided is helpful and reply oriented

View solution in original post