06-14-2018 03:02 AM
Hi,
Is there any example designs for Xilinx Video Scaler (Scaler Only) and AXI Stream Switch IP?
Actually, I'm expecting designs involving either/both of the IPs.
Please let me know if any
Regards,
Vinay
06-20-2018 10:24 AM
Hi @vinay_shenoy,
To get the source files into your SDK folder, please follow the directions in chapter 5 of PG235.
Step 16below is the step that adds the source files into your workspace.
-Sam
06-14-2018 07:47 AM
Hello @vinay_shenoy,
Yes, we do have such example design available.
Please refer XAPP1291 for more help.
Thank you.
06-14-2018 10:31 PM - edited 06-14-2018 11:29 PM
Hi @kvasantr
Is there any similar design targeting ZCU102 development board?
Also, I am looking for HDMI TX only design with ready to use SDK application for ZCU102. Please let me know if any example designs are available.
Thanks,
Vinay
06-15-2018 02:37 AM
Hello @vinay_shenoy,
Please refer PG235. which is product guide for HDMI 1.4/2.0 TX Subsystem.
You will find elaborated steps under the same.
Thank you.
06-15-2018 03:12 AM
Hi @kvasantr
I have gone through the stuff as did exactly the same for generating HDMI TX only example design. I was able to generate and compile the example design. I was expecting sdk source to be there along with the design. I didn't any sdk application sources.
Regards,
Vinay
06-19-2018 06:09 AM
Hello @vinay_shenoy,
Please refer chapter 5 of the PG235.
It does have steps to create the example design. you will get the SDK source through it.
Thank you
06-19-2018 10:53 PM
06-20-2018 10:24 AM
Hi @vinay_shenoy,
To get the source files into your SDK folder, please follow the directions in chapter 5 of PG235.
Step 16below is the step that adds the source files into your workspace.
-Sam