cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
784 Views
Registered: ‎05-03-2018

FPGA compatible with Display Port RX Subsystem 2.1 Macro w/ small package

Jump to solution

Dear all,

 

Can you recommend an FPGA compatible with DisplayPort RX Subsystem v2.1 macro that has a package smaller than 23x23 ?
Even more solutions are welcome.

 

Thanks in advance,

Best regards,
Andrea

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
778 Views
Registered: ‎11-09-2015

Re: FPGA compatible with Display Port RX Subsystem 2.1 Macro w/ small package

Jump to solution

HI @andreac_avnet,

 

The DP1.2 Subsystem IP only supports GTX Tranceivers.

 

So you need Kintex-7 fabric. But Kintex-7 smaller package is 23*23 (FBG484). So you need to look on zynq-7000 side. It seems that the only option is Z-7030 SBG485 (19x19).

 

Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post

2 Replies
Highlighted
Moderator
Moderator
779 Views
Registered: ‎11-09-2015

Re: FPGA compatible with Display Port RX Subsystem 2.1 Macro w/ small package

Jump to solution

HI @andreac_avnet,

 

The DP1.2 Subsystem IP only supports GTX Tranceivers.

 

So you need Kintex-7 fabric. But Kintex-7 smaller package is 23*23 (FBG484). So you need to look on zynq-7000 side. It seems that the only option is Z-7030 SBG485 (19x19).

 

Regards,


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**

View solution in original post

Highlighted
Explorer
Explorer
770 Views
Registered: ‎05-03-2018

Re: FPGA compatible with Display Port RX Subsystem 2.1 Macro w/ small package

Jump to solution
Thank you for the resolution.

Best regards,
Andrea
0 Kudos