cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Visitor
Visitor
5,286 Views
Registered: ‎09-25-2007

Hi Everybody,   I've got a Little problem. I want to simu...

Hi Everybody,
 
I've got a Little problem. I want to simulate a 200kHz trigger, so that every 200KHz a new cycle can be begin and in that cycle I want that every 20us a new instruction is allowed. When I want to simulate this I can only get a integer value and the sample time is 1 sec. Can I reduce this time? Or can I simulate this function.
 
Best Regards,
0 Kudos
1 Reply
Highlighted
Xilinx Employee
Xilinx Employee
5,269 Views
Registered: ‎08-07-2007

By default the Simulink system period and the Gateway sample periods are both set to 1.  The important thing is their ratio to each other.  If you wish to simulate your model in Simulink with values representative of your actual hardware then change both of these values accordingly.
0 Kudos